Click on the image to view the original image
LPCB Approved Fire Alarm Heat Detector
Conventional Fire Alarm Heat Detector Model:AW-CTD382
AW-CTD382 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
The conventional rate of rise heat detector uses thermal component to detect the temperature changing in the environment. It can enable fire alarm when the temperature difference achieved the setting rate of rise temperature value. It can also enable fire alarm when the absolute temperature value reach the setting fixed value. It has a stable and reliable working performance.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until rest by panel.
| Operating Voltage Range | 9 to 28 VDC Volts Non-polarized |
| Standby Current | ≤120uA@24VDC |
| Maximum Alarm Current (LED on) | ≤15mA@24VDC (1K Ohm current-limiting resistance) |
| Operating Humidity Range | ≤95%RH(40℃±2℃)RelativeHumidity,Non-condensing |
| Operating Temperature Range | -10℃ to 50℃(14ºF to 122ºF) |
| Fix Temperature Alarm | 57℃(135ºF)A2R |
| Rate of rise Alarm | 7.1℃/5S A2R |
| Height | 48.2mm installed in Base |
| Diameter | 99.45mm |
| Standard Number ref | EN 54-7:2000 |
| EC certificate | LPCB; ISO9001; CE |
1.Compatible with conventional fire alarm control panel
2.Unpolarized wire input
3.Wide range of operating voltages
4.Unique sensing chamber
5.Two LEDs blink standby, provide 360° visibility
6.Remote Indicator LED can be connected.
Product size Diameter: 99.45 mm, height: 48.2mm
Package details FOR REFERENCE:
Carton quantity: 10PCS/BOX; 10 Box/Carton
Box size : 20.5×23.5×11cm;
Carton: 43×27×58cm;
Weight 1.42kg/Box;
14.2kg/Carton;
ASENWARE was established in 2005. We have focused on the Fire Alarm and BMS
(Building Management System) over 12 years. Our headquarter is in London, UK.
We develop and manufacture addressable fire alarm system, conventional fire alarm system,
fm200 fire extinguishing system, fire fighting pump, fire hose and cabinets, emergency lighting system.
Based on our ISO9001 quality control system and our experiences in BMS system,
we integrated a series of products in our E-Shop; they are cost-effective and guaranteed quality.
We keep our best service for our customers, and have a rich experienced engineer team to design
and install for overseas projects.
Q1: How about the quality of the products?
A: We produce every product with good quality materials, and test carefully to make sure stable quality
before shipment.
Q2: Can I have a sample order?
B: Yes, Of course you can . we welcome sample order for your testing and checking products quality.
Mixed samples are avaliable.
Q3: What is the shipping time?
C: Small Qty order needs 3-5 working days, big Qty order usually needs 10-5 working days after
payments arriving. That"s depends on order Qty.
Q4: How to proceed the order if I have logo to print?
D: We will prepare artwork for visual confirmation at first, if the color and position are alright,we
will make print Logo sample from silk print factory and take picture for you to comfire before mass production.