Click on the image to view the original image
Manual call point fire alarm system
1.Special advantages compared with other MCP:
With cover protection
LED Light reminding
2.Technical parameters:
Working Voltage: | 24VDC |
Max. Current: | 1 A 24VDC |
Contact Resistance: | ≤0.02 ohm |
Working Conditions: | Temp. –10~+65°C Humidity:10%-90% RH |
3. Pictures of Fire Alarm Break Glass/Manual Call Point
3.3. Connection with the fire alarm system
The conventional fire alarm control system 2166 series matchedthe below detectors and accessories:
1. AW-CSD311:conventional photoelectric smoke detector
2. AW-CTD805: conventional fixed temperature heat detector
3. AW-CSH202:conventional smoke and heat combind detector
4. AW-CMC2166-1, AW-CMC2166-5: conventional manual call point/break glass
5. AW-CSS2166-2: conventional hooter/horn
6. AW-CBL2166-A: conventional fire bell
7. AW-CBL2166: conventional flash light
4. Installation details:
1.The green indicator is flashing when not press the button.
2.when press the button, the red LED indicator light will lighting
3.you should put a resistance R ( 330 ohm ~3k ohm ) at the terminal of the 1 and 3. normally, we put 470ohm in advance.
call point/break glass
fire alarm emergency button, fire alarm, manual alarm, break glass, breaking a glass, glass breaking, breaking glass, breaking of glass, breaking the glass, breaking of the glass, glass breaks, call points, emergency key, glass emergency, emergency buttons, button alarm, break glasses, manual fire alarm, glass break sensor, breaking glasses, manual call point, alarm glass, break glass emergency, break glass in emergency, manual call point, emergency glass break, glass breaking sensor, manual call points, push button emergency, break glass alarm, fire break glass