Click on the image to view the original image
Manual alarm system
1.Parameters:
Working Voltage: | 24VDC |
Max. Current: | 1 A 24VDC |
Contact Resistance: | ≤0.02 ohm |
Working Conditions: | Temp. –10~+65°C Humidity:10%-90% RH |
2. Pictures
The conventional fire alarm control system 2166 series matchedthe below detectors and accessories:
1) AW-CSD811:conventional photoelectric smoke detector
2) AW-CTD821: conventional fixed temperature heat detector
3) AW-CSH2831:conventional smoke and heat combind detector
4) AW-CMC2166-1, AW-CMC2166-5: conventional manual call point/break glass
5) AW-CSS2166-2: conventional hooter/horn
6) AW-CBL2166-A: conventional fire bell
7) AW-CBL2166: conventional flash light
4. Installation details:
1.The green indicator is flashing when not press the button.
2.when press the button, the red LED indicator light will lighting
3.you should put a resistance R ( 330 ohm ~3k ohm ) at the terminal of the 1 and 3. normally, we put 470ohm in advance.
cy, break glass in emergency, manual call point, emergency glass break, glass breaking sensor, manual call points, push button emergency, break glass alarm, fire break glass