Click on the image to view the original image
Asenware AW-FD602-UV conventional electrical flame detector
General Description :
1. Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity.
2. It detects in the ultraviolet (UV) spectral range for optimized speed of response.
3. Fast and capable to detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applicationssuch as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored.
4. The flame sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive, reliable, dust-resistant, corrosion proof and moisture-resistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity.
5. Set in a standard calibration to detect a flames at a distance of 25 meters, which flame created by 2Kg ethanol in a Container of Base 33cmX33cm, Height 5cm.
Asenware AW-FD602-UV conventional electrical flame detector
Asenware AW-FD602-UV conventional electrical flame detector
Parameters of electrical flame detector | |
Name | Conventional UV Flame Detector |
Model NO | AW-FD602-UV |
Operating Voltage Range: | 12 to 30 VDC Volts |
Standby Current: | ≤10 mA @ 24 VDC |
Alarm Current: | ≤30 mA @ 24 VDC |
Height: | 1.8 inch (45 mm) installed in Base |
Diameter: | 4.0 inch(103 mm) |
| Weight: | 5.4 oz. (153g) |
| Spectrum: | 180~290nm |
| Detection Angle: | 110 degree |
| Detection Sensitivity: | Grade I, 25m@flame (Container 33cmX33cm,Height 5cm with 2Kg ethanol ) |
| Relay Contact Load: | 1A@DC24V |
| Normal Status: | LED blinking in 5 seconds interval |
| Alarm Status: | LED lit steady |
| Protection rating: | IP 32 |
| Operating Humidity Range: | 10% to 93% Relative Humidity, Non-condensing |
| Operating Temperature Range: | -10°C to 50°C (14°F to 122°F) |
Asenware AW-FD602-UV conventional electrical flame detector
Wiring Diagram: Asenware AW-FD602-UV conventional electrical flame detector
Asenware AW-FD602-UV conventional electrical flame detector
Conventional Optional Accessories:
Wide Application: Asenware AW-FD602-UV conventional electrical flame detector
1. Pre-sales: Professional and experienced R&D center can offer free technical support and project budget.
2. Sales: All-around and all-weather online prompt reply as well as standard quotation.
3. After-sales: one year warranty and technical maintenance.
Asenware AW-FD602-UV conventional electrical flame detector
1. All-round technical support: Yes
2. Warranty: One year
3. Delivery time: Usually about 2 to 5 days.
4. Certificate: CE PLCB ISO9001
5. Payment terms: T/T , L/C , Western union , Money Gram