Click on the image to view the original image
Product Description
Features
1. Beam angle:60, 90, 70+140 degrees.
2. Aluminum die-casting heat sinks is good for heat dissipation.
3. It's major to replace the conventional flood light.
4. Green, energy saving, long and reliable life of 50,000 hours.
5. No RF interference, No IR/UV radiation ,no mercury pollution.
6. Wide colour availability in degrees Kelvin(K),2700-6700K.
7. Streamline exterior design, beautiful appearance.
8. Environment friendly ,energy saving (70~80%).
9. Special circuit design, each LED work separately, avoiding the single broken LED influence problem.
2. Aluminum die-casting heat sinks is good for heat dissipation.
3. It's major to replace the conventional flood light.
4. Green, energy saving, long and reliable life of 50,000 hours.
5. No RF interference, No IR/UV radiation ,no mercury pollution.
6. Wide colour availability in degrees Kelvin(K),2700-6700K.
7. Streamline exterior design, beautiful appearance.
8. Environment friendly ,energy saving (70~80%).
9. Special circuit design, each LED work separately, avoiding the single broken LED influence problem.
Application
1. Stadiums Lighting.
2. Building Exterior Lighting.
3. Amusement Park Lighting.
4. Airport Lighting.
5. Bridge Lighting.
6. Tunnel Lighting.
2. Building Exterior Lighting.
3. Amusement Park Lighting.
4. Airport Lighting.
5. Bridge Lighting.
6. Tunnel Lighting.
INSTALLATION
Bracket mounting
As figure below . two holes (dia12mm/depth60-80mm) had been punched on the symmetrical
position of tunnel wall according to the cut-out size from spec.
As figure below . two holes (dia12mm/depth60-80mm) had been punched on the symmetrical
position of tunnel wall according to the cut-out size from spec.
STEP1:Drill 2 holds on the wall(The distance between the two holes should be determined according to the lamp).
STEP2:Put the 2 expansion studs into 2 holes.
STEP3:Use two expansion screws to secure the bracket to the wall through 2 holds.
STEP4:We should use the hex wrench to loosen the two screws on both sides of the bracket, and then adjust the angle of the lamp.Secure the screws with a hex wrench, and finished.
STEP2:Put the 2 expansion studs into 2 holes.
STEP3:Use two expansion screws to secure the bracket to the wall through 2 holds.
STEP4:We should use the hex wrench to loosen the two screws on both sides of the bracket, and then adjust the angle of the lamp.Secure the screws with a hex wrench, and finished.
STEP1:Install the hook on the bracket of the lamp.
STEP2:Hang the hook on the eyebolt.
STEP3:We should use the hex wrench to loosen the two screws on both sides of the bracket, and then adjust the angle of the lamp.Secure the screws with a hex wrench, and finished.
STEP2:Hang the hook on the eyebolt.
STEP3:We should use the hex wrench to loosen the two screws on both sides of the bracket, and then adjust the angle of the lamp.Secure the screws with a hex wrench, and finished.
PROJECTS
By using our 150W module flood light to replace 450W Metal Halide bulb for flood lighting fixtures,
the customer is now able to save a lot per month from his electric bill.
the customer is now able to save a lot per month from his electric bill.
Note:
* Don't take the LED lamp apart.
* The LED lamp must work under the right voltage according to the specification.
* The LED lamp must work under the right voltage according to the specification.
Specification
Power
| 50W | 100W | 150W | 200W | 250W | ||||
Model | BB-MBD-50W-A3 | BB-MBD-100W-A3 | BB-MBD-150W-A3 | BB-MBD-200W-A3 | BB-MBD-250W-A3 | ||||
Luminous Flux
| 6000lm | 12000lm | 18000lm | 24000lm | 30000lm | ||||
Replacement | HPS 150W | HPS 300W | HPS 500W | HPS 600W | HPS 800W | ||||
Dimension(mm) | 95*315*130mm | 190*315*130mm | 285*315*130mm | 370*315*130mm | 455*285*130mm | ||||
Power | 300W | 400W | 500W | 800W | 1000W | ||||
Model | BB-MBD-300W-A3 | BB-MBD-400W-A3 | BB-MBD-500W-A3 | BB-MBD-800W-A3 | BB-MBD-1000W-A3 | ||||
Luminous Flux | 36000lm | 48000lm | 60000lm | 96000lm | 120000lm | ||||
Replacement | HPS 1000W | HPS 1200W | HPS 1500W | HPS 2500W | HPS 3000W | ||||
Dimension(mm) | 272*570*130mm | 370*570*130mm | 570*570*130mm | 740*570*130mm | 1140*570*130mm | ||||
Light Source | SMD LED,optional: COB chip | ||||||||
Luminous Efficacy | 120lm/w,optional: 140lm/w(COB chip). | ||||||||
Operation Temp
| -40 to +45℃ | ||||||||
CCT | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW /6500K SCW | ||||||||
CRI | 80 | ||||||||
Life Span | 50,000 hours at 25℃ | ||||||||
Voltage | 100-277VAC/50-60Hz 200-480VAC/50-60Hz available | ||||||||
Driver
| UL listed power supply
| ||||||||
Beam Angle
| 60° / 90° / 70°+140°(COB chip, only 120°)
| ||||||||
PF
| >0.95 | ||||||||
Warranty
| 3 Years
| ||||||||
Packing & Delivery
Company Profie