Click on the image to view the original image
| Light Sources | 19x15w RGBW 4-in-1 led |
| Beam Angle | 7-60° |
| Max Power Consumption | 285w |
| DMX Channel | 9 Channel |
| Control Modes | DMX512,Master-Slave,Auto run,music |
| Display | LCD Display |
| Warranty | 2 years |
| Protection Rating | IP20 |
| Dimension |
34x27x40 cm |
| NW | 6.2 kgs |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
| There are 6 normal steps for QC control process: |
| Step 1: all materials passed 100% IQC inspect |
| Before send materials to workshop and start to produce, our IQC technicians will inspect them.And only the materials are approved to send to workshop if they are qualified. |
| Step 2: at least 48 hours aging test before packing |
| All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test |
| Step 3: hang testing |
| Each batch production we will select certain percent to do hang or rotating test. |
| Step 4 : Environment high temperature testing |
| we did two parts test for high temperature testing : |
| A: testing during the product still in R & D |
| B: testing for each batch production |
| Usually we test the temperature reach to around 45℃. |
| Step 5 : vibration test--simulating transit environment |
| each batch production we will select certain percent to test to make sure the goods is safe in transport. |
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
>>>Click "Send" for us,your inquiries and
visits are warmly welcome!
Contact us
Highly Recommended