Click on the image to view the original image
CM-13 Medium Intensity AVIATION OBSTRUCTION LIGHT type B
ITEM | Parameter |
Model | CM-13 |
Operating voltage | AC220V |
Power consumption | ≤15W |
Flashing frequency | 20~60times/min. |
Peak light intensity | ≥1600cd |
Light source | RED LED |
Lifespan | 500000 hours |
Emitting color | RED |
Beam angle | 360° horizontal beam angle ≥4° vertical beam spread |
Overall size(mm) | 212*204*175mm |
Installation size(mm) | 162-4*10.5 |
Ingress protection | IP65 |
Lightning protection level | 15KA |
Light controlled sensitivity | 50lux |
Operating temperature | -55℃~55℃ |
Net weight | 4kg |
Wind load | 80m/sec. |
Production Show
Specification
1. Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 95%,
quite high impact resistance and fit the bad environment very well.
2. House of the light is made of aluminum alloy and painted by spraying plastics, the structure is high
strength, resistance to corrosion;
3. Using parabolic reflector optical design, range further;
4. Light source adopts high quality LED, low power consumption, long lifespan, high brightness;
5.Based on the single chip computer control, automatic identification sync signal, do not distinguish the
main light and auxiliary light, and also could be controlled by controller;
6.Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage
by error installation caused;
7.Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level;
8.The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so
that the light is suitable to harsh environment;
9. Integral structure, protection lever of IP65;
10. Ignitability rate UL-94V0, fit for all kinds of industrial situation;
11. GPS synchronizingfunction is available.
CK-15-T CK-16 CK-11L CM-18
(Solar AVL) (Medium Intensity AVL) (Low Intensity AVL) (High Intensity AVL)
Q1. Can I have a sample order for Obstruction light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than.
Q3. Do you have any MOQ limit for Obstruction light order?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for Obstruction light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on Obstruction light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.