Shandong Hengwang Group Co., Ltd.

Automatic cement concrete hollow brick making machine 

The brick machine is a general term for all the production of wall and paving machinery. Mainly divided into three types of vibration molding, hydroforming and hydraulic vibration.

Maintenance

Most of the brick making machines work in the harsh environment such as sediment, gravel, rain and wind and snow. The technical condition will inevitably fall faster than other machinery, and the cooperation between the parts will have different degrees of looseness, wear, rust and scaling. The mating properties of the joints, the mutual positional relationship between the parts and the coordination of the working conditions of the joints will be affected to varying degrees, resulting in a decrease in performance indicators such as power, economy and reliability, and even cause machine accidents. Therefore, we must pay attention to the technical maintenance of the brick-free machine. The technical maintenance of the brick making machine refers to a series of technical measures taken for the machine in order to make the machine often in a good technical state, to ensure its reliability, to improve work efficiency and to prolong the service life. Its main content is cleaning, fastening, lubrication and adjustment, combined with related inspection and inspection work. All types of mechanical equipment have clear maintenance regulations in the "Usage and Maintenance Manual", but in practice they often do not pay enough attention to it, mainly as follows:
1 There is the idea of "cultivating and supporting". There is no technical maintenance plan at all, the machine often carries "sick" work, and only when the machine can no longer work, it is sent for repair.
2 Due to the limitation of the harsh environmental conditions of the construction site, the technical maintenance is not carried out according to the maintenance requirements. It is to think about what to maintain and what to look for.
3 The quality of the personnel participating in the maintenance is low, and it cannot be carried out according to the maintenance procedures, and there is no corresponding maintenance record.
4 When the funds are scarce, it is not possible to maintain on time or use unqualified oil and spare parts.
5 When the construction period is tense, it is to make progress, not to maintain as scheduled, ignore the mechanical operation and forcibly work, etc.