Click on the image to view the original image
Specification:
1.product name:motion sensor solar light
2.mode:1619
3.solar panel:5V 3.2W
4.accumulator:lithium iron phosphate battery 3.2V 4500mAH
5.maximum voltage:3.65V
6.minimum voltage:2.65V
7.working current 30-1800mA
8.maximum power:6.8w
9.led specification:SMD 2835 29-30lm 4000k or 6000k
10.led quantities:48pcs
11.maximum lumens value:900lm
12.charging time:sun exposure time is greater than 8 hours
13.detection angle:120 degrees
14.detection distance:5-8 meters
15.waterproof grade:IP65
Features:
after charging it for a few hours,press the on/off button for 5 seconds to turn it on, it will go into the first mode,then each press of the button will change the operating modes with the lights flickering at the same time.
1.Micro-mode +induction mode
when someone comes,the sensor triggers circuit to start high light,the light will dim after someone leaving for 15 seconds(firstly recommended to us)
2.Induction mode
when someone comes,the sensor triggers circuit to start high light,the light will be turn off after someone leaving for 15 seconds(use in places with short lighting time)
3.Always light mode
it will always light at night with no induction function
4.Emergency light mode
commonly use for emergency lighting,such as power failure and night activities,the timing of emergency light mode is 30 minutes,the solar panels should be restarted or illuminated after the lights off
5.shutdown