Click on the image to view the original image
10 Led Battery-powered Wireless Night Light Stick Tap Touch Lamp Cabinet Light For Closets Cabinets Counters Utility
Specification:
| Name | Motion Sensor Night Light |
| Model No. | JE-MS01 |
| Size | 80*25 mm |
| Material | ABS + PC |
| Voltage | 1.5w |
| Sensor Range | 3 meters |
| Power Supply | 3*AAA batteries |
| Luminous Flux | 23lm-25lm |
| Sensor detective angle | 120 degree |
| Led | 10pcs SMD2835 |
| Color Temp. | 6500-7000k |
| Time of auto on | 30±5s |
Description:
♦ The Pir motion sensor light bulb comes with 10 leds, and uses 3 AAA batteries.
♦ Due to its easy installation, there is no need for wiring. It can be used in different spaces in need of lighting, such as cabinets, wardrobe, bookcase, car interior, workshop, storage room, etc.
♦ The Pir motion sensor has three installation modes which are:
- Using the matching PC pieces to place the product on the table
- Hanging on the wall
- Use of the attached 3M tape to paste the product on any smooth surface
♦ It uses haman body induction technology, induction angles as positive 100 degress, the induction distance is 3 meters.
♦ Its human body induction works perfectly through the photosensitive control technology. In the dark enviroment, when it senses an activity within the sensor range, the bulb will light up automatically. When people leave, the light switches off or stops activity for 25-30s. The motion sensor functions only at night or in dark areas, it will be in the off sate during the day or in bright areas.
♦ It uses human body induction for continuous trigger induction, the human body induction once started, as long as there is activity within the area of induction, the light bulb will always be bright.
♦ Even if the environment is bright during this process, the light still goes out automatically for 30s after people leave.
How to Operate:
♦ Battery installation:
To install the lamp battery, hold lamp body with the other hand, rotate the back cover in an anti-clockwise motion withright plam. Remove the rear cover, according to the positive
and negative poles of the battery compartment, put 3 pieces of AAA batteries into the bim. Recover the back cover, and use a clockwise rotation to tighten.
♦ Double glue installation:
Please make sure you install on a dry surface, wipe the surface with dry towel before you start the installation process.
Tear up one of the back side of the double-sided adhesive paper, affixed to the product after the center of the reserved round position.
Then tear up another at the back side of the double-sided adhesive paper, now attach to the surface of the installation, then press on items you want.
♦ PC piece installation:
Start by making a counter clockwise rotation of the rear cover of the product, remove the rear cover, put the supporting PC slice reserved hole on the buckle in back cover, then perform a clockwise rotation
to tighten. Now, your lamp can stand in the rain-proof table or suspension use.
Application:
Simply use the super-strong 3M double-sided adhesive pads or stick to any metal surface with the built-in magnet,Works great indoor and outdoor, especially as a night light for stairs, steps, hallways, dark closets & cabinets.
Package:
4 lights (battery not included) with 3M stickers in a box
Box size: 95*95*120MM