Click on the image to view the original image
Features:
Master/slave signal transfer: When one light is triggered and switch on, it emits the signal to other lights in the same group, and triggers them on, too.
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status, and waiting for the next room.
Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
| Item No. | PS-RS26D |
| Input voltage | 220-240V/AC, 110-130V/AC |
| Rated Loading | LED 16W |
| IP Rating | IP20 |
| Adjustment Type | Dip and Knob |
| Light Control | 10-2000lux |
| Detect Distance (radii.) | 2-10m |
| Time delay | 8sec to 10min |
| Stand-by Dim Setting Time | 30sec, 1min, 5min, 10min, 30min, 1h, 2h, 24h |
| Stand-by Dim Setting Brightness | 0%, 5%, 10%, 20%, 30%, 40%, 50%, 60% |
| Radio Linking Range | 30m Radio |
| Detection angle | 360° |
Dimmable:
The dimmable lights are added a light down function between the light is 100% switched on and switch off. It reduces the brightness of light when nobody there at a pre-set time. (The user can set up the brightness by themselves according to the actual usage).
If there is no motion in the stand-by time, the sensor turns off the light to save the energy. When somebody comes, the sensor will quickly turn on the light into full-brightness status. With this function the light can be extended the lifetime.