Click on the image to view the original image
12V 24V DC 0-10V Low Voltage Dimmer for LED Lights 
SUMMARIZE:
This series is 0/1-10V dimmer for led strip and other constant voltage or constant current led lamps.AC/DC products we have.No flicker on low brightness.Logarithmic brightness curve we use to get smooth and good sense for our eyes.They all compatible with products of Lutron,Dynalite,
Clipsal,LDS,Osram,Philips,ABB,Schneider,Levition,JUNG,BerKer,Be Lichtregler etc.
Keywords:0-10V DIMMER,1-10V DIMMER,PWM DIMMER,0-10V DRIVER,1-10V DRIVER,LED DIMMER,LED DIMMABLE DRIVER.
Features of DC 0-10V Low Voltage Dimmer
1,Single channels constant voltage output dimming control, maximum driving ability is 5A.
2,The analog voltage DC 1-10V dimming, dimming passive and active1-10V universal, with large control system. The modulated light from the structure.
3,The PWM driver output, LED output smooth, no flicker.
4,The product is provided with a self test function, in the absence of input signal, brightness to maximum output,can input short test whether the product is in work, input short brightness will gradually dark to a minimum. Keep the maximum luminance output open circuit.
Details of DC 0-10V Low Voltage Dimmer
Control channels:1CH | Input: DC12-24V | Output :5A/CH Max5A |
MAX Power:60W(12V)/120W(24V) | Frequency: 500HZ | The light gray level: 256 |
Signal Input:0-10V Dimming Signal | Connection: Press button | Protection grade: IP40 |
Product size: L90*W47*H22(mm) | Net Weight:125g | Work Temp.: -30~70℃ |
| Model NO. | Channels | Input Voltage | Max Current Load | Max Output Power | PWM Socket |
| DM9100 | 1CH | DC12V~24V | 1CH*10A | 120W(12V)/240W(24V) | Press button terminal |
| DM9103 | 1CH | DC12V~24V | 1CH*10A | 120W(12V)/240W(24V) | Press button terminal |
| DM9135 | 1CH | DC12V~24V | 1CH*6A | 72W(12V)/144W(24V) | Press button terminal |
| DM9138 | 3CH | DC12V~24V | 3CH*6A | 216W(12V)/432W(24V) | Screw terminal |
Instructions of DC 0-10V Low Voltage Dimmer
1,According to the product connection diagram, active 0/1-10 v voltage regulator, or passive 1-10 v dimmer,LED load,power by positive and negative to connect to the right port, open the power supply, adjust the 0/1-10 v voltage regulator, so as to change the output of the controller, until get the satisfactory of LED output brightness.
2,When the [ Analog IN ]port breaking, controller all light output; When the[ Analog IN ] port two terminals short circuit, the output shut down.
Wiring Diagram
Remark:
1. Please choose regulating curve smooth 0/1-10 V dimmer, otherwise it may directly affect the LED dimming smoothness.
2. Load LED's voltage and the controller of power supply voltage must be consistent, and must be in the product prescribed voltage input range.
3,0/1-10V Active and Passive dim signal input can get 0-100% brightness output and the dimming curved path is proportional to the dim signal.
Thank you very much for viewing this page, and wish you a nice day!
Please click the button below to view our homepage.