dmx 512 rgb led controller
SUMMARIZE:
Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~3 Channels for option and each channel able to achieve 256 levels of brightness controlling,and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.
Features of RGB DMX512 Decoder DE8000-6A:
1, Meets DMX512/1990 Signal with RJ45 DMX In/Out connection .
2, 256-levels brightness,full-color with driver controls.
3, Power without flashing, low jitter free.
4, Output 3 channels, 6A/CH, Max output current is 18A.
5, Can achieve asynchronous color changes effect under working with controller.
6, Cooperating with lighting control system, can realize rich change effect.
7, Setting up the DMX IP address freely by Dip Switch .
8, Modularizing and can be matched with different LED module neatly.
9, Custom-made available and 3 years warranty.
Tech-parameter of RGB DMX512 Decoder DE8000-6A:
Control channels: 3CH | Input: DC12-24V | Output :6A/CH Max18A |
MAX Power: 216W(12V)/432W(24V) | Frequency: 5000HZ | The light gray level: 256 |
Signal Input:DMX512/1990 | Connection: RJ45&Screws | Protection grade: IP40 |
Product size: L160*W47*H24(mm) | Gross Weight:220g | Work Temp.: -30~70℃ |
Specifictions of 3CH DMX512 Decoder Series:
3 Channel DMX512 Decoder Series | ||||
Model NO. | Control Type | Max Current Load | Max Output Power | DMX512/PWM Connector |
DE8000 | dmx address bar | 3CH*4A | 144W(12V)/288W(24V) | RJ45/Press Button |
DE8000-6A | dmx address bar | 3CH*6A | 216W(12V)/432W(24V) | RJ45/Screws |
DE8006 | LCD Display | 3CH*4A | 144W(12V)/288W(24V) | Press Button |
DE8008 | Digital Display | 3CH*4A | 144W(12V)/288W(24V) | Press Button |
DE8018 | Digital Display | 3CH*6A | 216W(12V)/432W(24V) | RJ45/Screws |
DE8019 | Auto-addressing | 3CH*3A | 108W(12V)/216W(24V) | RJ45/Press Button |
DE8020 | dmx address bar | 3CH*3A | 108W(12V)/216W(24V) | Press Button |
DE8033 | LCD Display | 3CH*6A | 216W(12V)/432W(24V) | Screws |
DE8239 | dmx address bar | 6CH*6A | 432W(12V)/864W(24V) | RJ45 /Screws |
1, DMX signal input/output interface (RJ45 interface)
2, Address code set the switch interface (Using method see "DMX series address dial the meter")
3, 4PIN is driver output interface (3 channels. CH1-CH2-CH3-output interface, can connect all kinds of full-color module and monochrome module automatically according to the lamps module load adjust the output pulse). 2 PIN is the power input interface (DC 12 -24 V input, supply the power for decoder itself and decoder with lamps ).
The test program operation:
Testing Mode: The dial switch1-9 dials are up that all light output,1-9 dials are down that is the RGB gradient testing program .
Wiring Diagram:
DMX-512 control signal connection
1, DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller input and output RJ45 interface: PIN1 is signal positive, PIN2 is signal negative, PIN7.8 is signal ground, please corresponding polarity connection.
2, DMX5000 output and DE8000-6A's transmission lines can't be over 300 meters.
3, DMX5000 each interface can with not more than 170 pieces of DE8000-6A. Eight output interface. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite connect the DMX lights.
4, When contacting 32 pieces of DE8000-6A, DMX signal must add a signal amplifier RE2000 . Cascade can't more than 4 PCS.
5, At the end of the connection, we should connect a DMX signal termination( Put down the code switch no.10 of DE8000-6A dial).