New 24 Channel DMX Multi Channel LED Controller RGB for LED Strip
SUMMARIZE:
Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~24 Channels for option and each channel able to achieve 8bit/16bit levels of brightness, and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.
Features of 24 Channel DMX Multi Channel LED Controller RGB:
1,Meets DMX512/1990,with RJ45 interface ,Screw terminal and XLR to choose.
2,8bit/16bit option,High/Low frequency option,Signal isolation,DMX signal amplifier,full-color with driver control.
3,Power without flashing, smooth at low.
4,Output 24 Channel ,5A/CH, Max120A . Application for 8 group rgb led lighting .
5,Can achieve asynchronous color changes effect under working with controller.
6,Setting up the DMX address freely with Dip Switch.
7,Strong anti - interference ability ,humanized terminal design.
8,An indicator lighting shows if the dmx signal runs .
9,Custom-made available.
Specification of 24 Channel DMX Multi Channel LED Controller RGB:
Control channels: 24CH | Input:: DC12-24V | Output: 5A/CH, MAX 120A |
MAX Power:2880W(24V)/1440W(12V) | Frequency: 500Hz(L)/5000HZ(H) | Signal Isolation: > 1000V |
Signal Input: DMX512/1990 | The light gray level: 8bit/16bit | Protection Class: IP40 |
Gross Weight:920g | Product size: L290*W122*H33(mm) | WorkTemp.: 0~70℃ |
New DMX Decoder Controllers Series 8Bit / 16Bit | ||||||
Model NO. | Channels | Input Voltage | Max Current | Max Output Power | DMX512 Socket | Bits |
DE8508 | 8CH | 12V~24V | 8CH*10A | 960W(12V)/1920W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
DE8512 | 12CH | 12V~24V | 12CH*7A | 1008W(12V)/2016W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
DE8516 | 16CH | 12V~24V | 16CH*7A | 1344W(12V)/2688W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
DE8524 | 24CH | 12V~24V | 24CH*5A | 1440W(12V)/2880W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
DE8532 | 32CH | 12V~24V | 32CH*4A | 1536W(12V)/3072W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
Images of 24 Channel DMX Multi Channel LED Controller RGB:Instructions of 24 Channel DMX Multi Channel LED Controller RGB:
1, DMX Signal IN/OUT interface: RJ45 / 3 Pin screws / 5 Pin XLR connector.
Specially 3 Pin screws interface with signal amplifier function.
2, DMX address encode with Dip-Switch(NO.1 to NO.9),
comply to universal DMX512 dial code.
3, Dip-Switch NO.10 is TERM for whole signal circle.
4, Dip-Switch NO.11 for Frequency option
ON: 5000HZ(H) OFF: 500Hz(L
5, Dip-Switch NO.12 for Bit option:
ON: 16bit OFF: 8bit
Attention: NO.11 and NO.12 changes,come into operation when Re-Power on.
6,POWER IN DC12-24V, Common anode constant voltage
output, can meet all kinds of full color module and monochrome module and automatically according to the lamps module load adjust output current, each channel maximum current not more than 5 amps.
SELF-TESTING:Put all Dip-Switch NO.1 to NO.9 ON, full channels output 3 seconds, then each color gradient.
Wiring Diagram:
DMX-512 control signal connection :
1, DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512
controller output signal positive, signal negative, signal ground with DE8524 input
interface corresponding connection.
2, DMX5000 output and DE8524's transmission lines can't be over 300 meters.
3, DMX5000 each interface can with not more than 170 pieces of DE8524. eight output interface.
Through the JBLED FLASH light making software and can with computer on line control. Realize
infinite contact the DMX lights.
4,When connected 32 pieces of DE8524, DMX signal must add a signal amplifier RE2000 .RE2000 Cascade can't more than 4 PCS.
Thank you very much for viewing this page, and wish you a nice day!
Please click the button below to view our homepage.