Click on the image to view the original image
Product Description
2020 Newest Patent Model Aquarium Programmable LED Light, Full Spectrum Plant Fish Tank Light Extendable Brackets with LCD Setting Display, IP68 Waterproof, 7 Colors, 4 Modes for Novices Advanced Players
* 🐟4 Modes:
①Default Mode. L: All-optical + Blue light(can change); Brightness is simulated sunrise to sunset + night effect.
②DIY Mode. L: All-optical;The brightness(10 kinds) and time (any time) of each stage(8 stages in total) can be set by yourself.
③Gradient Mode. The brightness time cannot be set. Cycle colors-dark blue, green, purple, light blue, yellow, red.
②DIY Mode. L: All-optical;The brightness(10 kinds) and time (any time) of each stage(8 stages in total) can be set by yourself.
③Gradient Mode. The brightness time cannot be set. Cycle colors-dark blue, green, purple, light blue, yellow, red.
④All-day All-optical Mode.You can fine-tune the color temperature of RGB light, can not set the brightness and time.
* 🐠New Upgrade: IP68 waterproof and easy to clean and wipe, even if it falls into the water, don't worry. The separable adapter, even if it is damaged, no need to replace the light to avoid waste. Power off memory function, after the light resumes work, the time is also real time, no need to set. The extendable bending bracket can be adjusted in length and easy to install, and can be applied to various freshwater tanks. Thicken aluminum to increase heat dissipation efficiency.
* 🐡High-quality Light: the color of the fish tank light is all-optical, dark blue, green, purple, light blue, yellow, red, dark
red (sign of the start color cycle mode). The light is soft, the color rendering index is close to natural light, up to 89%,
protecting eyes and fish, to refuse the discomfort caused by stroboscopic for fish and viewers. Using high-quality 2835 + 5050 model lamp beads, long service life, at least 50,000 hours. And there are 10 kinds of light brightness can be adjusted.
* 🌿LCD Display Operation: There are four function keys, mode setting / up / down / light setting keys. The main screen mainly displays the real-time local time (optional 12 hours/24 hours), the time is accurate to the second. The following two small screens are program timers, which used to set the start and end time of day and night in mode.
* 🍂Technical Specifications: Aluminum alloy plastic case. ①LIGHT SIZE:30*10*2.2cm. ②APPLICATION: 12~18inch. ③INPUT VOTAGE: AC100-240V. ④OUTPUT VOTAGE:DC15V. ⑥LED QUANTITY:40PCS. ⑦RENDERING INDEX:89. ⑧LUMENS:927. ⑨Color temp:6500-10000K. ⑩POWER CORD:4.9ft.
* 🐠New Upgrade: IP68 waterproof and easy to clean and wipe, even if it falls into the water, don't worry. The separable adapter, even if it is damaged, no need to replace the light to avoid waste. Power off memory function, after the light resumes work, the time is also real time, no need to set. The extendable bending bracket can be adjusted in length and easy to install, and can be applied to various freshwater tanks. Thicken aluminum to increase heat dissipation efficiency.
* 🐡High-quality Light: the color of the fish tank light is all-optical, dark blue, green, purple, light blue, yellow, red, dark
red (sign of the start color cycle mode). The light is soft, the color rendering index is close to natural light, up to 89%,
protecting eyes and fish, to refuse the discomfort caused by stroboscopic for fish and viewers. Using high-quality 2835 + 5050 model lamp beads, long service life, at least 50,000 hours. And there are 10 kinds of light brightness can be adjusted.
* 🌿LCD Display Operation: There are four function keys, mode setting / up / down / light setting keys. The main screen mainly displays the real-time local time (optional 12 hours/24 hours), the time is accurate to the second. The following two small screens are program timers, which used to set the start and end time of day and night in mode.
* 🍂Technical Specifications: Aluminum alloy plastic case. ①LIGHT SIZE:30*10*2.2cm. ②APPLICATION: 12~18inch. ③INPUT VOTAGE: AC100-240V. ④OUTPUT VOTAGE:DC15V. ⑥LED QUANTITY:40PCS. ⑦RENDERING INDEX:89. ⑧LUMENS:927. ⑨Color temp:6500-10000K. ⑩POWER CORD:4.9ft.
Specification
Watts | 20W | 26W | 36W | 48W | 60W | 72W |
Kelvin | 6500-10000K | 6500-10000K | 6500-10000K | 6500-10000K | 6500-10000K | 6500-10000K |
Fits Aquariums | 12-17 inches | 18-24 inches | 24-30 inches | 30-36 inches | 36-42 inches | 48-55 inches |
Lumens | 927 | 1290 | 1984 | 2365 | 2879 | 3346 |
LED Bulbs QTY | 40 Pcs | 77 Pcs | 112 Pcs | 144 Pcs | 178 Pcs | 248 pcs |
Output Voltage | DC 15 V 1.5 A | DC 15 V 1.5 A | DC 20 V 2 A | DC 20 V 2 A | DC 20 V 3 A | DC 20 V 3 A |
Input Voltage | AC100-240V | AC100-240V | AC100-240V | AC100-240V | AC100-240V | AC100-240V |
Material | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum |
Default Mode
The Default Setting:
1. Full spectrum white light in the day and blue in the night.
2. Full spectrum period: 06:30-18:30, blue light period: 18:00-23:30.
3. The brightness of the light changes in accordance with the curve designed.
Can Set：
1. Night colors can be changed, there are 6 kinds in total: dark blue, green, purple, cyan, yellow, red.
2. You can change the full spectrum white light period start and end time; night start and night time.
The Default Setting:
1. Full spectrum white light in the day and blue in the night.
2. Full spectrum period: 06:30-18:30, blue light period: 18:00-23:30.
3. The brightness of the light changes in accordance with the curve designed.
Can Set：
1. Night colors can be changed, there are 6 kinds in total: dark blue, green, purple, cyan, yellow, red.
2. You can change the full spectrum white light period start and end time; night start and night time.
DIY Mode (suitable for plants tanks)
* 8 Time Stages: L1, L2, L3, L4, L5, L6, L7, L8;
* 10 Brightness: 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%;
* 8 Stage Setting Time: Any Time;
In each time stage can only set a brightness, and the start and end time of this time stage are set by yourself.
* 8 Time Stages: L1, L2, L3, L4, L5, L6, L7, L8;
* 10 Brightness: 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%;
* 8 Stage Setting Time: Any Time;
In each time stage can only set a brightness, and the start and end time of this time stage are set by yourself.
Gradient Mode (Cycle Mode)
* Adjust the color of the light to dark red (after the yellow light), wait for about 20 seconds, and then begin to appear the
color cycle - dark blue, green, purple, cyan, yellow, red.
* To turn off the DAY-L and MOON-L, it can continue to cycle, the next day's light color is also a cycle mode.
* Adjust the color of the light to dark red (after the yellow light), wait for about 20 seconds, and then begin to appear the
color cycle - dark blue, green, purple, cyan, yellow, red.
* To turn off the DAY-L and MOON-L, it can continue to cycle, the next day's light color is also a cycle mode.
Brightness Change
There are 10 kinds of brightness can be adjusted, to simulate the effect of sunrise to sunset, and the brightness of the light can
be set in different 8 Time Stages, which can realistically simulate natural light. Not only can it brighten the fish, it can also
be applied to the growth of aquatic plants and promote photosynthesis.
There are 10 kinds of brightness can be adjusted, to simulate the effect of sunrise to sunset, and the brightness of the light can
be set in different 8 Time Stages, which can realistically simulate natural light. Not only can it brighten the fish, it can also
be applied to the growth of aquatic plants and promote photosynthesis.
LWarm tips
1. The settings are wrong or the settings are confusing, you can restore the factory settings and start over. In the non-DIY
mode, long press the up and down keys at the same time for a few seconds, until "SOP" appears, then unplug the power and plug
again, it can restore the factory settings.
2. Regardless of the Normal Mode or DIY Mode, if you change a certain small setting, such as changing the color of the middle
light. After setting, just reset the local time (add 1 minute and then subtract 1 minute), the latest setting will run
immediately.
1. The settings are wrong or the settings are confusing, you can restore the factory settings and start over. In the non-DIY
mode, long press the up and down keys at the same time for a few seconds, until "SOP" appears, then unplug the power and plug
again, it can restore the factory settings.
2. Regardless of the Normal Mode or DIY Mode, if you change a certain small setting, such as changing the color of the middle
light. After setting, just reset the local time (add 1 minute and then subtract 1 minute), the latest setting will run
immediately.
High efficient heat dissipation
The fin design increases the heat dissipation area, 0.05in thick aluminum. Note: why the aluminum surface of our hygger fish tank
light appears heat.Because there is a heat dissipation sticker between the lamp bead and the aluminum material, there is no gap,
and the heat is directly radiated to the outside, and the heat will not be stored in the light. The residual heat will damage the
lamp beads, light decay, and even damage the power supply after a long time.
The fin design increases the heat dissipation area, 0.05in thick aluminum. Note: why the aluminum surface of our hygger fish tank
light appears heat.Because there is a heat dissipation sticker between the lamp bead and the aluminum material, there is no gap,
and the heat is directly radiated to the outside, and the heat will not be stored in the light. The residual heat will damage the
lamp beads, light decay, and even damage the power supply after a long time.
Suitable for many fish tanks
There are 6 sizes, and the extendable bracket, there is always a light that can be used for your fish tank. The use of a separable
adapter will not cause the waste of replacing the LED light due to adapter damage. When there is a problem, if the display of the
light can light up, it is not a power problem and the light needs to be replaced or repaired. If the screen flashes and then dims,
or keeps dimming, it is a problem with the power supply, and you only need replace the adapter.
There are 6 sizes, and the extendable bracket, there is always a light that can be used for your fish tank. The use of a separable
adapter will not cause the waste of replacing the LED light due to adapter damage. When there is a problem, if the display of the
light can light up, it is not a power problem and the light needs to be replaced or repaired. If the screen flashes and then dims,
or keeps dimming, it is a problem with the power supply, and you only need replace the adapter.
Rendering index 89
The irradiated light is softer and does not hurt the eyes, the light is more stable. If you use a mobile phone to take
pictures,the screen is not flashing, the eyes and the fish are protected. The spectrum is smooth, close to the sunlight, the light
is more natural. 5 rows of lamp beads, the light surface is wider, the color is bright. High lumens, translucent fish tanks, and
brighter plants.
The irradiated light is softer and does not hurt the eyes, the light is more stable. If you use a mobile phone to take
pictures,the screen is not flashing, the eyes and the fish are protected. The spectrum is smooth, close to the sunlight, the light
is more natural. 5 rows of lamp beads, the light surface is wider, the color is bright. High lumens, translucent fish tanks, and
brighter plants.
Waterproof grade IP68
Waterproof grade IP68, fully sealed and waterproof, high light transmittance, waterproof and easy to clean. Long-term use does not
decay, the light effect is pure and transparent, the life is long, and it can be used for tens of thousands of hours.
Waterproof grade IP68, fully sealed and waterproof, high light transmittance, waterproof and easy to clean. Long-term use does not
decay, the light effect is pure and transparent, the life is long, and it can be used for tens of thousands of hours.
separable adapter
security adapter
extendable bracket
Packing & Delivery
Standard individual carton box ensure you receive well condition original factory producer first hand aquarium light;
Universal power plug ensure you easy to use;
Long term alibaba membership ensure cheapest slow China Post & fast express shipping way
Company Profile
Our company is a pioneer manufacturer of optoelectronic products in China. Our production facilities in China offer good-quality products and the best value in the world. Our company is dedicated to customer service and quality products at competitive prices and has years of experience in working on optoelectronic products for all of our customers.Our company was founded in 2002 and is headquartered in Shenzhen, with four branches in China. Our company focuses on but not limits to the research, development and production of LED, EL, LCM, switching power supplies, digital products, communications equipment, home appliances, automotive electronics and new energy products. We have a number of well-known experts who have made outstanding contributions to many products which have applied for patents.Our company specializes in leading-edge LED lighting products for indoor lighting and decorative lighting. With strong R&D team members who are professional in the areas of LED application, electronics, illumination, structure, LED special power supply and technical design, we run our factory strictly in accordance with ISO9001:2000 international quality standard. All of our products meet the standards of CE, UL, GS and RoHS.Our LED lights and lamps have the lifespan of 100,000 hours. Our LED bulbs have different bases, degrees and colors to meet your lighting requirements. We produce high-quality LED that uses minimal electricity and creates little heat and takes low maintenance. LED is a cost-effective alternative of traditional lighting. Our LED lighting products give consistent light even in extreme environment.We deeply believe that people who believe in wonder could create wonder.
4.8/5
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to North America(30.00%),Africa(10.00%),Southeast Asia(10.00%),Eastern Asia(10.00%),Mid East(10.00%),South Asia(10.00%),Central America(5.00%),South America(5.00%),Domestic Market(3.00%),Northern Europe(3.00%),Eastern Europe(2.00%),Oceania(1.00%),Western Europe(1.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
LED MODULE,LED POWER SUPPLY,EL WIRE AND PANEL,CAR LIGHT,BIKE LIGHT
4. why should you buy from us not from other suppliers?
Pioneer LED & EL Lighting manufacturer
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP,DDU,Express Delivery；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,Credit Card,Cash;
Language Spoken:English,Chinese
We are based in Guangdong, China, start from 2011,sell to North America(30.00%),Africa(10.00%),Southeast Asia(10.00%),Eastern Asia(10.00%),Mid East(10.00%),South Asia(10.00%),Central America(5.00%),South America(5.00%),Domestic Market(3.00%),Northern Europe(3.00%),Eastern Europe(2.00%),Oceania(1.00%),Western Europe(1.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
LED MODULE,LED POWER SUPPLY,EL WIRE AND PANEL,CAR LIGHT,BIKE LIGHT
4. why should you buy from us not from other suppliers?
Pioneer LED & EL Lighting manufacturer
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP,DDU,Express Delivery；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,Credit Card,Cash;
Language Spoken:English,Chinese