Click on the image to view the original image
15W 25W E27 Germicidal UV tube Lamp Sterilizing Led uv bulb
1. Both wattage and voltage of the lamp use inductive ballast to measure, power-supply voltage 220±3V, frequency 50±0.5 Hz
2. When testing, the light tube should be in the horizontal position, and probe should be placed in the middle of normal distance, at 1 meter away. The settling time of lighting should not be less than 5 minutes before testing.
1-1 Appearance quality
1-1-1 Appearance quality of lamp is inspected by visual method or a vernier caliper of an accuracy ± 0.02mm.
1-1-2 Glass tube should be transparent, clean, straight, and should not have the defects, affecting the penetration of ultraviolet ray.
11-3 Lamp caps should be fixed on both ends of the lamp tube tightly and properly without any faults affecting the installments.
1-1-4 Lamp caps should be fixed on the lamp tube tightly and closely.
1-1-5 The material of UV germicidal lamps and quartz sleeve requires the quartz tube can penetrate through 253.7nm.
