1. When cut glass and mirror products, appropriately use some volatile high quality cutting oil (such as kerosene) to avoid causing surface and back paint to be scratched and bruised, the working stand must be clean.
2. Timely inject water when edge grinding to avoid high temperature to prevent and reduce the grinding wheel grinding pressure.
3. Dry grinding is strictly forbidden.
4. Clean the glass immediately after edge grinding, put in ventilated place after dry, avoid contact with moisture. this can prevent the black side and lace production.
5. To avoid the erosion of acid the installation, acid gel is strictly prohibited and can only use neutral adhesive stickers. If need a bottom line, do not use lining glued wood.
