Design a set of reverse osmosis operation plan 10 You need to specify,What type of reverse osmosis system is needed.Because there are many kinds of reverse osmosis membrane systems,There is a pure water reverse osmosis system,Ultra-pure water reverse osmosis system,Water reuse system, etc,Different RO systems, the design will be different.Under normal circumstances,
ShenZhen ShinWang Import & Export Co.,Limited upholds a spirit to be down-to-earth and fearless in the development. Now we have many honors and certifications. ShinWang is located in the area of convenient traffic, with a great number of shopping facilities. This makes a convenient condition for transportation. ShinWang provides comprehensive and reasonable solutions based on customer's specific situations and needs. Just gove us your requirements and specifications, we can present you with flawless ODM services.
Filter in front of steam pressure reducing valve First check whether the steam has had heat,How much heat is there?Because the steam with high overheating will cause the filter screen to deform when passing through the filter screen;However, steam without overheating or low overheating may also cause some steam to liquidate due to throttling after flowing through the filter screen,Create an image of water impact.Check if there is a blockage in the drain line at runtime (or before,Or whether the heating pipe before the pressure reducing valve has reached the goal,Whether the drainage has been completed.The drain device before the decompression system should be normally opened.In addition,There may be problems with your operation.First open the pipeline after the pressure reducing valve,Then open the pipeline before the pressure reducing valve,If the drainage is not smooth or not enough,It may also cause damage to the filter screen.The water impact of the steam is actually when the steam partially condenses
