ROYAL HOME FURNITURE CO.,LTD. is committed to developing ROYAL HOME furniture into world-renowned brands. Get info! The Professional Supplier of metal table in the Manufacturing Furniture Industry Compared with other same kind of products, low coffee table produced by ROYAL has the following advantages and features. According to different needs of customers, ROYAL is capable of providing reasonable, comprehensive and optimal solutions for customers.
What are the types and functions of filters? High pressure pipeline filter (A): Located on the outlet pipe of the pump, it has the function of protecting pollutants from entering the system. Therefore, the concentration of pollutants in the system can be controlled. However, because it is a high-pressure supervisor, it must be affected by the pulse and pressure of the pump, so the material and strength of the filter element should be carefully considered.1. air filter: Located on the fuel tank, it has the ability to prevent pollutants from mixing with air due to the change of fuel quantity in the fuel tank. Therefore, the filtering accuracy should have the same performance as the filter, and the capacity should be left with sufficient room to prevent the internal pressure of the tank from becoming negative pressure due to hole blocking, causing the hole phenomenon of the pump. Pay special attention when the surrounding environment is bad.2. high-pressure pipeline filter (A): It is located on the outlet
Do you want to add a precision filter behind the dryer Shenzhen beiteng Technology Co., Ltd. answers this question professionally for you:When installing the filter, one will install the bypass valve at the top of the filter. Why install the bypass valve? The function of installing the bypass valve at the upper end of the compressed air filter is to close the isolation valve while replacing or cleaning the filter, and open the bypass valve to ensure the gas supply demand and normal machine operation.The beiteng filter matching principle is the first three and the last one, that is, three filters with different precision are installed on the front end of the dryer, and a precision filter is installed on the back end to facilitate the filtering of compressed air step by step. Is it pressure relief?
