What is the principle of laminated filter? What can be recommended for the internal stacking of the laminated filter? And what is the precision range? Thank you. Hello! The stacked filter is also called a disc filter, and the body of a stacked filter is composed of a single or multiple unit heads, plus pipe and valve control, etc. Each unit head is equipped with a stack, and a certain number of stacks are fixed and locked on the fixed rod of the unit head, forming an independent filter unit head. The overlay is tightly pressed by superposition, and the grain lines overlap each other to form a filtering channel. the filtering accuracy is determined by the size of the filter slot and the number of intersections. this is the filtering principle of the overlay.It is clear from the following picture that there are two operating states for the overlay filter: filter status and backwashing status. In the filtration state, the raw water passes through the disk from the outside, and the filter disk is tightly press
Foshan taihai rubber and plastic co., LTD. has always been bearing the concept of integrity management in mind. Inquire now! The Professional and Reliable Supplier of rubber strip taihai's rubber grommets has been further improved based on advanced technology, as reflected in the following aspects. Guided by the actual needs of customers, taihai provides comprehensive, perfect and quality solutions based on the benefit of customers.
How to clear the dust of industrial dust removal equipment? 1.Vibration cleaning method, using mechanical devices to beat or shake the frame of the suspension filter bag, so that the filter bag vibrates and clears the dust, and the round bag applies vibration on the top, it produces vertical or horizontal vibration, or both directions of vertical or horizontal vibration at the same time, and the position where vibration is applied also has a position in the middle of the filter bag.Since the dust should be raised when cleaning ash, the vibration cleaning ash often adopts a chamber working system, dividing the entire dust collector into several bag chambers, and cleaning the dust by chamber in sequence, which can keep the dust collector running continuously.Carry out the bag room of cleaning ash, and use the valve to automatically cut off the air flow without letting the dust-containing air enter.The top-based Vibration cleaning ash can vibrate hundreds of times per minute, causing the dust to fall off into th
