How to deal with the oil consumption is too much in SINOTENG construction machinery?
1. The injection timing is incorrect. Adjust it according to different models of the diesel.
2. There is oil leakage in the fuel system. Check the fuel pipes.
3. The fuel temperature is super unsatisfactory. Correct the temperature as required.
4. The temperature of the engine oil is too low. Improve the temperature of the engine oil.
5. The piston ring and cylinder jacket is seriously abraded to cause severe air leakage. Repair or replace relevant components.
6. The combustion is abnormal. The orifice of the oil injector is blocked, and the injection pressure is low. The plane distance of the oil injector extending to the cylinder cover does not conform to the ex-factory requirements. Check the oil injector and replace or repair it according to the condition.
7. The distribution phase is incorrect. Calibrate the distribution phase. Repair or replace relevant components according to the calibration result.
8. The air filter is blocked. Clean the filter element or replace it.
9. The valve clearance does not conform to the assembly requirement. Check the abrasion of each component of the distribution system. Repair or replace the components.
10. The air storage clearance is incorrect. Check the air storage and adjust or replace the cylinder gasket.
11. There is oil leakage in the fuel system. Check the fuel delivery pump, plunger and barrel assembly, and delivery valve couple. Repair or replace according to the abrasion condition.