1. Hang the cable above the cable basket with lifting tools
2. Release about 2.5 meters of cable to connect the cable to the power line
3. Pull the cable from the bottom of the basket to the power box, temporarily disconnected
4. Put the cable into the cable basket, try to make each coil as big as possible, and the diameter is slightly smaller than the diameter of the cable basket
5. Fix the cable on the cable bracket and insert the cable plug into the socket
6. Connect the cable to the power box and start the lift to check whether the cable is wound
7. Cable protection frame shall be installed at the same time during the installation of guide rail frame
8. Adjust the position of cable protection rack and cable bracket to ensure the cable is in the "U" type center of cable protection rack