First, keeping
1. Avoid direct sunlight, rain and snow and keep it clean. Keep it under normal temperature.
2, prevent contact with acid, alkali, oil, organic solvents and harmful drugs and other substances that affect the quality of rubber.
3, the correct placement, avoid mutual overload extrusion and forced bending deformation.
4, it should be hung on the bracket or flat on the shelf, not directly on the ground.
Second, the installation
1. When installing the synchronous belt, do not force the installation by hard pry with tools.
2. Accurately adjust the parallelism and eccentricity of synchronous belt pulley.
Third, lhe swelling
1. When adjusting the tension force of the synchronous belt, the deflection and load should be calculated to apply the tension accurately.
2. The surface roughness of the synchronous belt pulley should be within the range of ra1.6-ra3.2.
Four, with the belt wheel
1. The synchronous belt pulley shall be used after the corrosion is removed.
2. Do not paint or wax the synchronous belt pulley and tape.
3. Avoid dust and oil stains on the synchronous belt and pulley.
4. Please check whether the synchronous belt pulley is worn
5. If the synchronous belt pulley is seriously worn, it should be replaced.
