Safety precautions for the use of ZLP lifting platform

   date:2020-10-27     browse:4    comments:0    

1.   The bearing strength of the hanging platform supported by the top surface of the building or structure shall not be less than 1500 kg/m2. If the suspension mechanism is borne by the top embedded part, the safety factor of the embedded part shall not be less than 3. The power supply for the electric hanging platform must be 380V, three-phase five-wire grounding power supply.

2.   ZLP lifting platforms are strictly prohibited used within 10M from the high voltage line. In thunderstorms, fog, snow and wind speed greater than 10.8m/s(equivalent to wind gust of 6) of the severe climate environment, the lifting platform is strictly prohibited to operate.

3.   If there is any road under the scope of construction range, warning notice or safety corridor must be set clearly. Remove all obstacles when electric lifting platform is working, clear warning signs should be set at the corner or there is any protrusion, do not open the window during construction.

4.   During night construction, the construction site should be provided with sufficient lighting, and protective measures should be taken to prevent moisture, water and corrosion of operators, safety devices, electric control boxes, wire ropes and safety ropes.


 
Article Source: Safety precautions for the use of ZLP lifting platform
reward
 
More>Related News
0 itemsComments

Recommended Articles
Recommended News
Browse Ranking

Links