In modern life, awnings have emerged as a kind of modern construction equipment in people's lives. What are the treatment measures in the installation and construction of awnings? Xiaobian today gives a brief introduction to this point.
1. The base layer of waterproof sealing material must be flat, dense, dry and clean. When there is loose wool on the surface of the base layer, brush it with a wire brush and then brush the base oil together. When the cold base oil is not sticky, the waterproof sealing material is embedded. When encountering quilting, the 20mm × 20mm groove is cut out, and the cold base oil is brushed to embed the waterproof sealing material.
2, waterproof sealing material into a 20mm thick strip, force into the seam, and then use the caulking tool to compact the sealing material piece by piece to prevent the occurrence of gaps, peeling and sagging, and then brush the cold base oil on the surface , compacted, smoothed. Note: Pay attention to the waterproof sealing material embedded in the gap between the balcony, the sun visor and the side facade.
3. Pay attention to the sealing material embedded in the joint of the sunshade panel and the crack on the wall of the awning, and no leakage shall be allowed. Wipe the mortar cap on the upper part of the seam; when making the two felt oil waterproof layer on the sunshade panel, stick the linoleum along the wall.
The above is the handling measures that should attract the attention of the construction workers during the installation of the awning shed. I hope that it can bring help to the majority of friends, and can safely construct and prevent it from happening.
