What materials will a dust filter bag use? I. dust filter bag at normal temperature: the bag at normal temperature is mainly made of polyester, polypropylene, acrylic and other fibers through non-spinning and textile processes,It has excellent properties such as good air permeability, smooth surface, good dimensional stability and easy stripping of dust.It is mainly used for dust removal and normal temperature flue gas treatment in industries with dust pollution in general industrial enterprises;Two, medium temperature dust removal filter bag: With the improvement of the state's emphasis on environmental protection,Especially in recent years, the rapid development of bag dust removal technology industry,China began to use imported synthetic fibers to develop conditions that could be adapted to the worse conditions,High performance filter material for long service life.At present, the more common medium-temperature filter materials are treated by soaking, waterproof, oil-proof and anti-corrosi
The basic service philosophy of ShenZhen ShinWang Import & Export Co.,Limited is that avalon 841. Check it! Compared with other products in the same category, bitfury miner has the following major features. ShinWang always focuses on meeting customers' needs. We are dedicated to providing customers with comprehensive and quality solutions.
What should be noted in the use of efficient filters? 1. check the filter bag and equipment: The bag filter should check the filter bag specifications and whether it is in good condition before filtering,Then check if the inside of the filter is clean,There are no defects in several round circles for sealing.When loading the filter bag, pay attention to the suede of the felt material.Pack the filter bag,The press cover can be filtered.2. pay attention to the filtration pressure: When the pump is opened,The pressure of the bag filter is about 0.05MPa,With the filtering time extended,The slag in the filter bag gradually increased,Pressure is also rising.Adjustable Pressure with bypass valve.The filter pressure is generally maintained at 0.1 0.3MPa is more appropriate.When the pressure rises to 0.4MPa,Should stop,Open the cover to check the slag accumulation of the filter bag,Change the filter bag,Continue filtering.If the dirty filter bag is cleaned and then used,Comprehensive consideration depending on the
