DMX Pixel light controller artnet to SPI/DMX Artnet SPI controller

16 channels Artnet to SPI /DMX pixel light controller DC5V-24V BC 216

This Artnet-SPI/DMX Pixel light controller is dedicated to converting the Artnet signal into SPI signal,which is designed for large project with high-density pixel light,such as panel lights,construction's contour lamp,etc.Besides converting Artnet based control protocols into various LED driving IC signal , it also outputs DMX512 signal at the same time,convenient for the connection of different types of led lamp,and to achieve the unified control of all kinds of led lamps in the same project.

3,Basic Features

1. With LCD display and built-in WEB SERVER setting interface, easy operation.
2. Support Ethernet DMX protocol ArtNet, can be expanded to other protocols.
3. Multi SPI (TTL) signal output, up to 5440 pixels control.
4. Output DMX512 signal at the same time, convenient for the connection of different types led lamp.
5. Support various LED driving IC,flexible control.
6. Support online firmware upgrade.
7. Adopt DIP plug-in design for the easily-worn parts, Users can repair the damage caused by wrong wiring or short circuit.
8. Built-in test mode, using a network interface with indicator light, work status is clear when at a glance.
4,Safety warnings
1.Please don’t install this controller in lightening, intense magnetic and high-voltage fields.
2.To reduce the risk of component damage and fire caused by short circuit, make sure correct connection
3.Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
4.Check if the voltage and power adapter suit the controller
5.Don’t connect cables with power on, make sure a correct connection and no short circuit checked with instrument before power on.
6.Please don’t open controller cover and operate if problems occur.The manual is only suitable for this model; any update is subject to change without prior notice