1.Tube Power: 28W;

 2. Lube Luminous Flux(lm): 2800-3700;

 3. Lamp Luminous Efficiency(lm/w) :100-140.

 4. CRI(Ra>):>85;

 5. Input Voltage: 85-277Vac;

 6. Certification: ETL CE RoHS;

 7. Color Temperature(CCT): 2700K,3000-3500K, 4000-4500K, 5500-6000K;

 8. Base Type: G5;

 9. LED Light Source: Epistar Chip.

10. Warranty: 5 years;

11. Working Lifetime(hour) 50000;

12. Working Temperature(℃): -40-50;

13: Lamp Body Material: Aluminum; 

14: Cover : Clear or milk ;

15: Size: Diameter:26*32*1149mm.

        Terms and Conditions

1). Lead Time: 5-7 business days for samples order, 7-10 business days for bulk order in general
2). Payment Term:  T/T, Western Union, papal or L/C can be accepted
3). MOQ: 5 pcs
4). Warranty: 3 years

5). We can arrange shipment directly to your address via DHL, UPS, sea shipment etc. T8 8Ft G13 LED Tube  

The information you should got before making order

1) You should make sure if the led tube lights will fit your existing fixtures

2) Its important to figure out the bellowing specification led tube

a. the voltage: 110vac, 277vac

b. color temperature: warm white(2700-3500k), natural white(4000-5000k) or cool white(5000-7000k) or even more Kelvin 7000+

c. the type of original fluorescent tube light: T5(15mm), T8(26mm) or T10(30mm)

d. the type of lens: Clear, Frosted(Milky) or striped,, T8 8Ft G13 LED Tube  

         Q: there are so many vendors in market who can offer similar or same appearance led

       products,how to distinguish good qualified led products?

Comparing the weight of housing. Because good heat sink housing is much heavier than the lighter ones for good

heat dissipation.

Comparing the chips. Good and responsible vendors use 80% of Max chips current so that chips will have good

performance in lumens maintained and long life span.Simple way is to get the information of the chips power and

quantity of the chips.

Comparing the drivers. Drivers are the most important keys for led products. The life spans of led products are

equal to that of drivers. So it’s important to adopt good quality drivers.

Remember that its no way for vendors tooffer good quality products while also offer extremely low prices.

there are some cost secrets in materials. 

Q: which specs are needed to be known very well?

The data for total lumens of fixture. Some time, the lumens you get is not for the whole fixture, but the lumens of

chips. These two are different conception.

Lumnens of whole fixtures are actually needed by end-customers.

Knowing well what the type of original and traditional lights and power so that you can calculate the lumens you

need and decide the power of led products basing on the total lumens of fixture.

With improvement of led chips tech,the lumens efficiency had been increased a lots, so that its not correct that

higher power led lights are better than lower power led lights. The Key factor is the lumens of whole fixture.

Sometime, lumens of 10w led bulbs from some vendors are not good as that of our 7w UL listed bulb.

Q: What is CRI and the relationship between the CRI and Lumens?

CRI is some kind of eyes’ feeling when our eyes see the real color from objects in sunshine. Higher CRI,

higher comfort for eyes. While higher CRI, lower lumens efficiency compared to relatively lower CRI. For

LED lights, the CRI is mostly from 70 to 75Ra,which is enough for normal usages.

CRI with 80Ra or morewill be much higher in cost. In some special and professional place, CRI80

is necessary, such as in museumor High-end clothing store or Hospitals.

Q: Can LED lights really last 50,000 hours in lifespan?

In theory, after 50,000hrs, the lumens maintain should be 70%, in fact, the lifespan can be 100,000hrs

(good quality). But we should note the lifespan of the driver or the components which is shorter than

50,000hrs. Normally the lights can last less than 30,000hrs. so drivers are also much more important

for led lights.

2015 Update All Connector Design Smd2835 5ft 22w T8 Led Tube   

  _• High CRI: All of them are at least over 80

  •  High performance on stability and uniformity of Color temperature

  •   High Luminous efficiency: 23-25LM/pc

  •  Good Quality: SMD2835 LED chips from Taiwan Epistar or Lumnemax

 Ambient temperatures-25°c

  •  Constant current power supply with IC chip drip driver, then control the voltage be stable

  •  HIGH STABILITY: constant current output and no drift

  •  High Safty with Power Protection: Open Circuit Protection, Short Circuit Protection and Overload

  • Protection

  •  PF ≥0.99

  •  Thermal imagery

• UL Flaming Rating: V0

• Transmittance: 95%

• High Anti – Ultraviolet:NO Becoming yellow and NO Crackle

• High Weathering Test:- 50 C° - 160 C°

• High Toughness and High Impact Resistance

• C: Environment-friendly and Flame Retardancy Material

• UL Flaming Rating: V0

• High Weathering Test:- 40 C° - 130 C°

• High Anti – Ultraviolet:NO Becoming yellow and NO Crackle

• High Insulating Property:Tested under 1250-7000V AC in 1 minute

2015 Update All Connector Design Smd2835 5ft 22w T8 Led Tube    

SunPZone Lighting Electronic co., ltd is a professional lighting company handling research, manufacturing andsales of all kinds of LED lighting products. The main products of our company: Led tube, Led tube fixture, Led bulb,Led spotlight and so on, all of which are widely used in commercial lighting decoration, indoor and outdoor using,home and project decoration, Advertising and Cabinet Lighting. Under the ISO9001:2000 and ISO9001:14001Quality Management System, most of our products have CE, ROHS and/or UL certificates, DLC, Energystar,all of them can prove that Sunpzone can supply excellent quality and good service to customers.Your OEM or ODM projects are welcomed.

Our corporation has owned not only advanced production lines and detection equipment, but also a professional research teams,plenty of well-trained technical staff, experienced management groups and sales team. Besides, our corporation always attaches great importance to the study of science, technology development and talent training. With the core idea of, strive for existence with good quality, Sunpzone offers beautiful, comfortable, safe, energy-saving light environment for our customers by our products and services.

Based on expertise led production skills and the ability of research and development, Sunpzone has received a lot of praise and trust from our loyal customers and gradually been recognized and selected as an ideal partner.

As a globally operating manufacturer, We have been still taking low-carbon and energy saving green lighting as our responsibility to reduce greenhouse gas effect, and actively fulfilling our social responsibilities, contribute to society, employees of return!  T8 8Ft G13 LED Tube

2015 Update All Connector Design Smd2835 5ft 22w T8 Led Tube  

2015 Update All Connector Design Smd2835 5ft 22w T8 Led Tube

1. Promptly reply within 24 hours

2.Well-trained, professional and experienced salesmen with good English

3.OEM&ODM are welcomed

4. Factory offers 3-5 year warranty for our LED lights.

5. Factory will responsible to maintenance or replace any defective products within warranty period.

6. Factory will keep secret for your sales area, design ideas and all of your private information.

1. Payment terms: T/T 30% deposit in advance, the balance of 70% before delivery;

Western Union and Paypal for small amount are accepted also.

2. Delivery time: 3-5 days for samples, 7-12 days for normal order

3. Shipment: UPS/DHL/FEDEX/TNT or sea shipment.           

4. Shipping port: Shenzhen

5. Discounts are offered based on order quantities.