6-8 inch Round triple layer Fire topper Speaker hoods

• Wrap around design ensures improved acoustic, fire and thermal performance.
• No Fixings required – Hood is clamped firmly to plasterboard by the speakers swing clamps.
• Triple layer construction. Two intumescent layers encase fire retardent acoustic foam.
• Fire Red indicates to other trades, this is a fire safety product.
• Suitable for installation in suspended or plaster board ceilings.
• Restores the ceiling’s fire integrity.
• Fully compliant with IEE and Building Regulations for Fire and Acoustic integrity of ceilings – BS476 Parts 21, 23 for acoustic and fire dispersion.
• Reduces sound leakage into room above.
• Simple and rapid fixing free installation from below or above the ceiling.
• Fire hoods are a requirement for all in-ceiling speakers that are installed in or adjacent to habitable rooms or within a location of access or escape. Cutting large holes in ceilings for in ceiling speakers destroys the fire barrier and under UK Law the installer is responsible for maintaining that barrier when installing any equipment.

Firetopper Firehoods have been designed specifically for in-ceiling speakers and conform with the latest IEE and Building Regulations for Fire and Acoustic integrity of ceilings. The Firetopper Pro also contains a layer of acoustic foam to cut sound leakage into the room above (typical reduction approx 3dB), as well as providing a thermal barrier to prevent heat escaping through the speaker.

• Max Speaker Cut Out Size 300mm
• Max Speaker Height 185mm
• External Diameter 360mm
• External Height 170mm
• Aperture Diameter (and Diameter to seem): 190mm(240mm)
• Weight 500g

Aperture for speaker is 220mm so most 6.5” speakers can be accommodated without trimming the flange. For larger speakers flange can be trimmed to upto 300mm.