Share
All LED luminaires produced in Heliang are estimated carefully to ensure Tj (Junction Temperatre) of LED is under 85°C. Tj is the major indicator for measuring the lifespan of a luminaire.
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Design Support
Support to lighting designers, offering the widest and most unique photometric portfolio, allowing simulation of the performance of our products for various retail projects.
Projects developed according to the standards and maximizing the energy saving: even a small reduction of Watt per luminaire makes a difference in the long run. On request we provide a complete lighting evaluation, including a 3D model .
Economic assessment of the project, with analysis of the upfront cost, energy savings, payback time and white certificates, including the installation cost and future maintenance.
Projects developed according to the standards and maximizing the energy saving: even a small reduction of Watt per luminaire makes a difference in the long run. On request we provide a complete lighting evaluation, including a 3D model .
Economic assessment of the project, with analysis of the upfront cost, energy savings, payback time and white certificates, including the installation cost and future maintenance.
Further than producing luminaire, we dedicate to create best illumination experience with our partners over the wolrd, and win the projects together.
Quality Assurance
Reliable Thermal Management
Citizen C.O.B applied, with Absolute Maximum Junction Temperature 160°C capability.
Reliable Silicone by Shinetsu OSR-500
ShinEtsu OSR-500 silicone, provide 2.5W heat conductivity coefficient after 2500hrs 20psi 85℃/85%RH, and -40centi degree /30min <->125℃/30min aging test.
Die-casting Aluminum & Coating
All Luminaires in Heliang are processed with proper Powder Coating Process, with a complete procedure of cleaning and powder coating.
Akzol Nobel Interporn Powder Applied to ensure the strength of coating layer and color consistency in different batches.
Mechanical Reliability
4 wires 3phase track adaptor applied, maximum load 20Lbs, made of PC material, reliable for long lifespan service.
All driver devices inside of luminaire is fixing properly with screws, which is much more reliable than Glue work, and provide possibility of maintenance if necessary.
Reliable Grounding wiring inside, comply with safety directives.
Optic reflector & COB
PC reflector with top quality electroplate, provides 3 beam spreads optional, 15/24/38 degree.
Proper COB holder designed with reserved space for thermal expansion of COB Light Emitting Surface.
Technical Parameter
2. General Parameters | ||||||||
SIZE: | 01 | 02 | 03 | |||||
LAMP DIAMETER( D ) : | Ø60mm | Ø80mm | Ø90mm | |||||
LAMP LENGTH( L ) : | 135mm | 150mm | 160mm | |||||
HEIGHT( H ) : | 130mm | 155mm | 165mm | |||||
MATERIAL: | Aluminum | |||||||
TRIM COLOR: | White | |||||||
PROTECTION LEVEL: | IP20 | |||||||
LIFETIME: | L70> 50,000Hrs | |||||||
OPERATION TEMP.: | -30 ~ +50°C | |||||||
OPERATION HUMIDITY: | 20~90% | |||||||
3. Electric Specifications | ||||||||
SIZE: | 01 | 02 | 03 | |||||
RATED POWER : | 15W(±5%) | 20W(±5%) | 30W(±5%) | |||||
INPUT VOLTAGE: | 220~240VAC, 50/60Hz | |||||||
POWER FACTOR: | >0.90 | >0.90 | >0.90 | |||||
POWER EFFICIENCY: | 89% | 88% | 91% | |||||
DC CURRENCY: | 350mA | 500mA | 750mA | |||||
DRIVER MODEL: | LF-GIF022YF | LF-GIF022YF | LF-GIF036YF | |||||
WITHSTAND VOLTAGE: | I/P-O/P: 3.75KV, <5mA, 60s | |||||||
EMC Compliance: | YES | |||||||
CONTROL: | On-off switching | |||||||
4. Photometric Parameters | ||||||||
SIZE: | 01 | 02 | 03 | |||||
LUMINOUS FLUX: | 1350Lm(±5%) | 1800Lm(±5%) | 2700Lm(±5%) | |||||
LUMINOUS EFFI.: | 90Lm/W(±5%) | 90Lm/W(±5%) | 90Lm/W(±5%) | |||||
LED CHIP: | 12S4P | 12S5P | 12S6P | |||||
CRI: | Ra90 | |||||||
CCT: | 2700/3000/3500/4000K Optional | |||||||
BEAM ANGLE: | 12°/ 24°/ 36° Optional | |||||||
SDCM: | <3 | |||||||
Applications
Company Information
Customer Reviews total 0 items