Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |



China
Long Term
2019-10-16 18:28
Scan By Phone



Brand: |
none |
Address: |
China |
Min.Order: |
none |
Supply: |
none |
Valid until: |
Long Term |
RedDot controller CB3 is used for controlling a monitoring RedDot LED aviation obstruction light. With the friendlier interface and easy-to-set switches for multifunction. With DIN rail terminal blocks, this controller comes with circuit breaker and surge protector to protect obstruction lighting system against over-voltage and lightning strike.
With CAN bus technology, CB3 comes with a control module with three channels, the numbers of each channel connected is not limited. All lights are controlled by CAN bus high and low signal rather than power switch.
The operation mode of the three channels can be programmed to customer’s desired. When in the catenary application, the flash sequence will be middle-top-bottom, all lights in one channel will flash simultaneously.
Equipped with a MW 40W power converter, the controller converts input voltage 85-265VAC to 48VDC output voltage for powering the control module. Power box for lights shall connect to the controller for centralizing power management for lights.


CB3 obstruction light controller
PHC01 photocell for REDDOT controller
Features |
•All lights are controlled by CAN bus high and low signal rather than power switch assured lights longer lifespan
•LED indicators for light, power and photocellSpecifications |
Specification | |
Input Voltage | 85-265VAC, 48VDC,24VDC,12VDC |
Power Consumption | 40W |
Flash Rate | Steady/20-60FPM |
Photocell sensitivity | 200Lux |
Operaton Temperature | -30C°~+60C° |
Enclosure | SS304 |
Protection | IP65 |
Weight | 7KG |
Dimension | 500*400*200mm |
Ordering Code |
Series | AC/DC | Voltage |
CB3 | A | 220(85-265VAC) |
D | 48 | |
24 | ||
12 |
Solution Example |



Customer Reviews total 0 items