Brand：	none
Address：	China
Min.Order：	none
Supply：	none
Valid until：	Long Term

Product Details

Product Description

Addressable Fire Pump Control Panel 1 loop/2Loop/4Loop

The AW-AFP2188 fire alarm detection system is type of analog fire alarm control panel which has 324 alarm control points (detectors and modules which are characterized by fully mixed coding, non-polarity and two buses). It complies with the provisions of both Fire Alarm Control Units (GB4717-2005) and Automatic Control System for Fire Protection (GB16806-2006).

1. Fire alarm control panel uses an AC-DC master-standby power supply system which will automatically change between the master and standby power supplies in the event of a power failure of either of the two power supplies to ensure uninterrupted operation of the system.

2. The AW-AFP2188 can be connected to a special mini-printer to realize real-time printing. The AW-AFP2188 can be connected to floor fire display panels to display fire alarms by standard RS-485

3. The AW-AFP2188 fire alarm control panel can be connected to ten multi-line linkage control/monitoring points to control and monitor important equipment.

working condition parameters fire alarm detection system for building safety

	Temperature	-10°C~+50°C
	Humidity	≤95%
	Power supply	AC 220V 50HZ DC 24V 6A
	Output contact capacity	AC 220V 1A DC 27.6V 3A
	DC power	DC24V 5.0Ah, two fully sealed maintenance-free DC12V 5.0Ah storage batteries connected in series
	AC input voltage	AC 220V±20% 50Hz
	AW-AFP2188 system capacity	100/200/324 points (non-polarity, two wire bus, fully mixed coding)

Analog addressable gsm fire alarm system
	Length	≤1500m
	AC input voltage	AC 220V±20% 50Hz
	AC input power	120w
	DC power	DC24V 5.0AH
	AW-AFP2100 system capacity	648 points .biggest capacity is 1992 points with three loop cards
	System working conditions	1. Temperature: -10°C~+50°C 2.Humidity: ≤95% 3.Power supply: AC 220V 50HZ DC 24V 6A 4.Output contact capacity: AC 220V 1A DC 27.6V 3A