Brand：	none
Address：	China
Min.Order：	none
Supply：	none
Valid until：	Long Term

Product Details

Product Description

Addressable RGB color DC5V LED strip 5050 SMD flexible light 144pixels SK9822/apa102c

Model number	TS-apa102-144
LED TYPEE	SMD 5050 RGB chip
Available color	RGB
IC Model	apa102 ic built-in
Color	Addressable full color
View angle	120 degree
LED QTY	144LEDS/M
POWER	43.2w/m
Voltage	DC5V
PCB color	white /black
PCB width	12mm
Installation	wiht 3M adhesive back ,easy for installation
IP rate	IP20/IP65(Silicon tube )/IP67/IP68
Package	1M/reel .with anti-static bag
Application	indoor /outdoor decorative lighting ,ceiling lighting ,sign lighting etc.

Detail use information:

1)Addressable full color led strips----apa102 ic built-in

2)30pcs led per one meter

3) individually control ----------1 ic& 1 led chip

4)Standard Reel Length: 5meter/roll, also can be customized.

5) Cutted: 1 integrated RGB LEDs per segment, can be cutted per 1LED.
you can cut this stuff pretty easily with wire cutters, there are cut-lines
every 0.65''/3.33cm(1 LED each), Solder to the 0.1'' copper pads and you're good to go.

6)Power supply: You must use a 5V DC power supply to power this strip, do not use higher than 6V or you can destroy the entire strip

7)Connectors: 4PIN JST female and male connectors, DAT, CLK, DC5V+, GND-.these LEDs have 2 wires (input and out put) for sending data - one clock pin and one data pin.That means you need two pins, not one, to control DotStars. Because the clock and data is seperated, you can use any processor speed or type to control these strips, and you don't have to worry about being careful with the timing.

8)LED Brightness: Red ~600mcd, Green ~500mcd, Blue ~150mcd