Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
CCE Color Changing LED Signal RGBW Controller
HX-SZ600-RGBW-TOUCH
LED RGBW Controller with full touch remote control
HX-SZ600-RGBW-TOUCH, adopts the advanced micro control unit, it is used for controlling a variety of LED lamps. For instance, point source of light, flexible light strip and so on; it has many advantages such as touch remote control, easy connection and simply to use. Meanwhile, you can adjust brightness, static color choices and various dynamic changes in lighting effects through wireless touch remote control. And according to the actual need of customers, it can carry out jumpy changing, gradual changing, stroboflash and other effects of change.
Especially, HX-SZ600-RGBW-TOUCH designed with Synchronization function. It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips.
Product Feature
HX-SZ600-RGBW-Touch is constant voltage, suit for all kinds of the constant voltage LED RGBW lamps.
There is a RF remote touch control 5 functions, 1 color ring and 1 color sense lamp in the center, all buttons are in the touch form, the color ring have 128 levels in different colors.
Using RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips.
There are 9 modes in total, including 2 white static colors and 7 dynamic modes. The brightness of all static color and the speed of the dynamic modes are adjustable.
3-year warranty.
Technical Parameters
Controller
Working temperature | -20-60℃ |
Supply voltage | DC12V~24V |
Output | 4 channels |
Connecting mode | common anode |
External dimension | L91*W88*H24 mm |
Packing size | L106*W106*H66 mm |
Net weight | 320g |
Gross weight | 360g |
Output gray | 256 levels (RGBW each) |
Output current | <8A(each channel) |
Output power | 12V:<384W, 24V:<768W |
RF frequency | 433.9MHz |
Remote control
Ambient temperature | 0-45℃ | Working voltage | AC90-265V(50/60Hz) |
Standby power | 0.2W | Working power | 2W |
Net weight | 130g | RF frequency | 433.92MHz |
Dimension | 86*86*34mm | RF distance | ≤20m |
Structure | 86-type European standard | ||
1. Interface Specifications
The function of each button as below:
Name of key | Instruction | Remarks |
ON/OFF | ON or OFF in any time |
|
White color | For white color |
|
Mode | The mode will go to next, when you touch the key each time | 9 modes in total. |
Speed/Brightness + | The Speed/Brightness will add, when you touch the key each time | Speed for dynamic modes, Brightness for static modes. |
Speed/Brightness - | The Speed/Brightness will subtract, when you touch the key each time | Speed for dynamic modes, Brightness for static modes. |
Color Ring | Touch any color which you want |
Matching/Clear code operation
RF CODE
Tips: Receiver can be controlled by any one the same remote as factory default; full touch remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.
Matching code operation
If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:
Step 1: Pressing key “Mode” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
Step 2: Continuously to press the key “White Color “ for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.
Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.
If not, please re-operate from step 1 to 2.
Clear code operation
Back to factory default, wall-panel can be controlled by any one the same remote control.
Step 1: Pressing key “Mode” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
Step 2: Continuously to press “Speed/Brightness -“ 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.
Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control(any one the same remote control can be used to clear the code).
If not, please re-operate from step 1 to 2.
Typical Application
Product information for placing order
Product name | Item number |
LED RGBW Controller with full touch remote | HX-SZ600-TOUCH-RGBW |
Customer Reviews total 0 items