Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Product Description
Benefits
1.Replace conventional shoebox light.
2.Precision die cast aluminum housing.
3.Durale chip and fade resistant power coat finish.
4.Easy installation.
5.CE ROHS listed.
6.California new policy request shoebox have to need 3 step dimming with sensor.
1.Replace conventional shoebox light.
2.Precision die cast aluminum housing.
3.Durale chip and fade resistant power coat finish.
4.Easy installation.
5.CE ROHS listed.
6.California new policy request shoebox have to need 3 step dimming with sensor.
Features
Example:BB-LD-100W-S-A-DW
1.Aluminum die casting heat sinks is good for heat dissipation.
2.It's major to replace the conventiona shoebox light.
3.Green ,energy saving,long and relialble life of 50,000 hours.
4.No RF interference ,no IR / UV radiation,no mercury pollution.
5.Wide colour availability in degrees Kelvin(K),2700-6700K.
6.Streamline exterior design,beautiful appearance.
7.Environment friendly ,energy saving (70%~80%).
8.Special circuit design,each LED work separately,avoiding the single broken LED influence problem.
Application
1.Area lighting,street lighting.
2.Architectural decorative lighting.
3.Industrial lighting.
4.Stadium lighting.
5.Port wharf lighting.
6.Roadway lighting.
2.It's major to replace the conventiona shoebox light.
3.Green ,energy saving,long and relialble life of 50,000 hours.
4.No RF interference ,no IR / UV radiation,no mercury pollution.
5.Wide colour availability in degrees Kelvin(K),2700-6700K.
6.Streamline exterior design,beautiful appearance.
7.Environment friendly ,energy saving (70%~80%).
8.Special circuit design,each LED work separately,avoiding the single broken LED influence problem.
Application
1.Area lighting,street lighting.
2.Architectural decorative lighting.
3.Industrial lighting.
4.Stadium lighting.
5.Port wharf lighting.
6.Roadway lighting.
California new policy request shoebox have to need 3 step dimming with sensor.
Dimensional Drawing
Luminous Intensity Distribution
Projects
By using our 150w LED shoebox light to replace 400w metal halide bulb for shoebox lighting fixtures,
the customer is now able to save a lot per month from his electric bill.
the customer is now able to save a lot per month from his electric bill.
Note
1.Don't take the LED lamp apart.
2.The LED lamp must work under the right voltage according to the specification.
Microwave sensor
2.The LED lamp must work under the right voltage according to the specification.
Microwave sensor
Features
1.Provides line voltage on/off switching and 0-10 VDC dimming control.
2.Works with ballasts or LED drivers.
3.High and low modes fully adjustable from 0-10V.
4.Time delay from 5 to 30 minutes.
5.Optional cut off delay.
6.Adjustable ramp up and fade down times .
7.High inrush stability 0 crossing circuitry for reliable ,long life speration latching relayis durable for all load.
8.Optional daylighting setpoints feature automatic calibration,or permit manual adjustment.
9.Polycarbonate,flame retaradant,UV resistant,impact resistant.
10.FCC.
Dimming function
3 step dimming function
The product can achieve 3 step dimming control ,to choose from:Brightness 100% →Dimming brightness(10% 20% 30%
optional)→Off;Provides two delay times:full bright delay time and half brightness time;Daylight detection threshold and sensing distance adjustable.
If the set light value (10 LUX,30LUX,50LUX) is less than the brightness of the ambient natural light,the lamp does not
automatically enter the semi-bright sate(10%,20%,30%).
When someone enters the room,the sensor senses the movement of the human body,the light will be 100% full ,when the person leaves,the full light delay time after the light will enter hald bright(10%,20%,30%),half light delay time off.
1.Provides line voltage on/off switching and 0-10 VDC dimming control.
2.Works with ballasts or LED drivers.
3.High and low modes fully adjustable from 0-10V.
4.Time delay from 5 to 30 minutes.
5.Optional cut off delay.
6.Adjustable ramp up and fade down times .
7.High inrush stability 0 crossing circuitry for reliable ,long life speration latching relayis durable for all load.
8.Optional daylighting setpoints feature automatic calibration,or permit manual adjustment.
9.Polycarbonate,flame retaradant,UV resistant,impact resistant.
10.FCC.
Dimming function
3 step dimming function
The product can achieve 3 step dimming control ,to choose from:Brightness 100% →Dimming brightness(10% 20% 30%
optional)→Off;Provides two delay times:full bright delay time and half brightness time;Daylight detection threshold and sensing distance adjustable.
If the set light value (10 LUX,30LUX,50LUX) is less than the brightness of the ambient natural light,the lamp does not
automatically enter the semi-bright sate(10%,20%,30%).
When someone enters the room,the sensor senses the movement of the human body,the light will be 100% full ,when the person leaves,the full light delay time after the light will enter hald bright(10%,20%,30%),half light delay time off.
Wireless handheld configuration tool
Feature of wireless handheld
1.Establishes high and low mode light levels for 0-10V control.
2.Sets time delay ,cut off time and sensitivity for motion detection.
3.Enables light level settings for either hold off control or daylighting control.
4.Initiates automatic setpoint configuration.
5.Allows ramp up and fade down rate adjustments.
6.Locks sensor settings to prevent unauthorized changes.
7.This product mees the materials restrictions of ROHS.
2.Sets time delay ,cut off time and sensitivity for motion detection.
3.Enables light level settings for either hold off control or daylighting control.
4.Initiates automatic setpoint configuration.
5.Allows ramp up and fade down rate adjustments.
6.Locks sensor settings to prevent unauthorized changes.
7.This product mees the materials restrictions of ROHS.
IR coverage of wireless handheld
Installation
Warning:if the lamp pole has existing ballast or capactitor,please take them off,because the shoebox street lamp just connecting to AC(alternating current) input it will work.
Specification
Power | 100W | 150W | 185W | 200W | 240W | 300W | |||||
Model | BB-LD-100W-S | BB-LD-150W-S | BB-LD-185W-S | BB-LD-200W-S | BB-LD-240W-S | BB-LD-300W-S | |||||
Replacement | HPS 300W | HPS 400W | HPS 600W | HPS 700W | HPS 700W | HPS 1000W | |||||
Luminous Flux | 13000lm | 19500lm | 24050lm | 26000lm | 31200lm | 39000lm | |||||
Light Source | SMD LED | ||||||||||
Luminous Efficacy | >130lm/w | ||||||||||
IP | 65 | ||||||||||
Voltage | 100-277VAC/50-60HZ 200-480VAC available | ||||||||||
CRI | >80 | ||||||||||
Remark | Model suffix can add X,X can be blank,A,B,or C,A means no photocell sensor,B means photocell sensor,C means motion sensor. | ||||||||||
Operation Temp. | -40 to +45℃ | ||||||||||
CCT | 2700K SW/3000K WW/4100K NW/5000K DW/5700K CW | ||||||||||
Life Span | 50,000 hours at 25℃ | ||||||||||
Color | Black,white,bronze,silver | ||||||||||
With sensor | Timer control,motion sensor ,photocell sensor ,3 in 1 dimming,wifi zigbee connect ,photocell + timer control ,3 step dimming,GPRS ,3G/4G ,bluetooth ,PLC and smart motion sensor. | ||||||||||
Microwave sensor default setting | Someone brightness 100% ,microwave sensitivity 75% ,hold time 5 minutes,start illumination 50 LUX,continuous brightness 30% ,the duration of 30 minutes. | ||||||||||
PF | >0.95 | ||||||||||
Warranty | 5 Years | ||||||||||
Packing & Delivery
Customer Reviews total 0 items