More Related Product

Product Description

MODEL		CLPS150-W1V12	CLPS150-W1V24
OUTPUT	RATED VOLTAGE	12V	24V
	NO-LOAD VOLTAGE(MAX.)	12.6V	25.2V
	VOLTAGE TOLERANCE	±5%	±5%
	RATED CURRENT	12.5A	6.25A
	CURRENT RANGE	0-12.5A	0-6.25A
	RATED POWER	150W	150W
	RIPPLE& NOISE (MAX.)	120mVp-p	150mVp-p
	POWER FACTOR(Typ.)	0.6	0.6
INPUT	VOLTAGE RANGE	100-240VAC
	FREQUENCY RANGE	50-60 Hz
	AC CURRENT(Typ.)	2.56A/115V, 1.28A/230V
	EFFICIENCY(Typ.)	85%	87%
	COLD START CURRENT	30A/AC220V
	SETUP, RISE, HOLD UP TIME	200ms, 100ms, 30ms
	NO-LOAD CURRENT	<50mA/240VAC
PROTECTION	OVER LOAD	hiccup 115%~135% of the rated power 150W,
		recovers automatically after fault condition is removed
	OVER CURRENT	protected over the maximum rated current,
		recovers automatically after fault condition is removed
	SHORT CIRCUIT	hiccup short circuit,
		recovers automatically after fault condition is removed
	OVER TEMP	protected when the Rectifier ≥105°C,
		recovers automatically after temperature fall to environment temp
ENVIRONMENT	WORKING TEMP&HUMIDITY	–20°C~+60°C (no frost), 20%~90%RH
	STORAGE TEMP&HUMIDITY	–40°C~85°C, 10%~95%RH
	SEISMIC CAPACITY	10-500Hz 2G 10.min/1 60min
	WITHSTAND VOLTAGE	I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min,
	INSULATION RESISTANCE	100M ohm s/DC500V
SAFETY&EMC	SAFETY STANDARDS	GB4943 ;IEC60950-1; EN60950-1
	EMC STANDARDS	EN55022 CLASS A;GB9254
REMARK	1. The above mentioned data were measured at 220VAC input and 25°C.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated
	with a 0.1uf & 47uf parallel capacitor.

Photos Overview