USB Powered led strip 5V Power TV mood light 5050 Smd led strip kit 50cm/90cm/1m/2m/3m customized size Quality Choice

Features:

• 24-Key Remote Control: 16 buttons for Multi Colors, 4 buttons for Lighting Modes ( flash, strobe, fade and smooth ), 2 buttons for Brightness Adjustmen / Speed Adjustment, 2 buttons for ON/OFF Switch.
• Perfect DIY Kit: 4 Pin on the strips can be pulled out. Just tear off the yellow non-stick tape from the back side of the led strips, then you can stick to different shapes at your will. 2 types of strong adhesives are used to fixed cables and control box, providing secure and strong installation without worrying about falling off.
• Waterproof & Silicone Material: IP 65 Waterproof, available for both outdoor and indoor decorations even in rainy days. Silicone material, good light transmission, good toughness, you can make different shapes at will. Touch safe, it will not overheat after many hours using.
• Relieve Eye Strain: led Bias lighting makes your home like theater, your display will be clearer. Bright and gentle backlight help to reduce eye strain while you enjoy the movie.
• Application: Enhance your viewing pleasure with your lovely family with a dynamic and vibrant light. USB Powered, available everywhere when there is a USB Port, such as TV back, dining table, desktop back, dressing-table, etc.

Package includes:
4 x 30 RGB LEDs Light Strip Male to Male 20.5 inches
2 x 4 Pin LED Connecting Cable Female to Female 20.25 inches
1 x USB-DC Power Cable 20.5 inches
1 x 24-key IR Remote Control ( Battery Included CR2032/CR2025 )
1 x RGB Control Box ( 2x1.31x0.81 inches, Input Voltage: DC5V; Output Current: Max. 12A ) with IR Receiver
12 x Adhesive Cable Clips
1 x Double-sided Adhesive Square

Main Features:
Powered by USB.
Please peel off the adhesive tape before pasting to the surface.
DIY: Paste into Different Shapes According to Your Will.
DC port should be connected with the RGB Control Box.
Can be cut at the cutpoint into proper length.
Please pull out the transparent sheet when you use.
Make sure the remote control point to the receiver when you adjust different modes.

Installation Guide:
1.Clean the surface of the TV back with towel. Cut the adhesive tape from the end. Paste the LED strips on the TV back at your will.
2.Connect the DC port to the RGB control box, then choose an area near to the TV USB port to fix the control box with the double-sided adhesive square.
3.Connect the LED strips with the 4 pin cable and the control box. When you feel the 4 pin cables are too long, you can roll them up and use the adhesive clips to fix them on the TV back.

 SMD5630 LED Strip    SMD5050 LED Strip    SMD3528 LED Strip    SMD3014 LED Strip    SMD2835 LED Strip    RGB+WW+PW CCT LED Strip    LED Neon Light     220V/110V Led Strip

 led strip 5V Power TV mood light

How to connect :

Q1: What is the Warranty for the led strips?
A1: For the led strips,we have 2 years warranty.If any quality problems on our side occured in this period ,we will take on the shipping cost and replacement.

Q2: What is your led strip colour temperature?
A2: the led strip have warm, natural,pure and cool white with colour temperatures measured in Kelvin (K).

The lower the colour temperature is, the warmer the light given by the LED:

we can controll the color temperutre very well ,our led strip is small tolerance of the CCT +- 100K.

Warm white = 2000-2200k ,2300-2500k,2600-2800k,2800-3000k

Natural white = 4000K-4500K
Pure white = 5500K-6500K
Cool white above 7000K

Q3: What is your led strip CRI?
A3: CRI is a figure which feedback the real objects colors.Higher CRI with higher cost.For LED strip,our 3528 and 5050 led strip CRI>90Ra , 2835 5630 3014 335 led strip CRI>80Ra.

Q4:Is there cheap shipping cost to import to our country?
A4: For small order,express will be best.And for bulk order,sea ship way is best but take much time.For urgent orders,we suggest via air to airport plus our ship partner send to your door.

Q5:What's your leadtime?
A5: the sample order leadtime will be 3-5days .

       the big order leaddtime will be 10-12days.

Q6:Why Winbo can do custom assembly or offer OEM led strip?

A6: Winbo has gained a lot of experience on OEM assembly of LED strip lighting. The strips can have different size, layout, customer logos and labels. We also want to apply the experience to LED luminaires as we have good design and engineering team. Because we have our own CNC processing machines we can quickly work out prototype for LED strip. We will strictly follow the principal that we won’t disclose or sell customer unique designs or jointly developed products to another third party.

Q7:what's are the best selling products in Winbo?

 A7: led strip lights, led neon light, led pixel

Whatsapp: 008618824296729

Wechat:008618824296729

Skype: winbopower

Email: sales01 at szwinbo.com

QQ: 2639645668