WS2811 12V RGB addressable led strips

Specification:

5050 smd rgb led strip ws2811

Input voltage :.............DC12v; 

Power: .......................7.2watt/meter, 36watt/roll;

LED resource:.............High brightness 5050 RGB; 

Q'ty of LED: ...............30leds/meter, 150leds/roll, each 3LEDs separately controlled

IC Type: .....................ws2811 IC; 

Q'ty of IC: ...................10IC/meter (1 IC drives 3led chip); 

Pixels:..........................10ic/meter; 

Grey scale: .................256;

Bits/color: ...................8-bits/color;24bits for RGB color

FPC size: ...................Width: 10mm, High: 2.5mm; 

FPC color: ..................White/Black

Protection rate: ..........IP66 in silicon tube

Colors: ........................Full color RGB, dream color changing; 

Cuttable:......................Every 3LEDs cuttable; 

Package: ....................5meters/reel in anti-static bag. 

standard pinout diagram for our pixel lights:

Brown:- 5/12v +
Yellow/green:- earth/ -
Blue:- Data

Input end: male connector(screw end with bare pin)

Output end: female connector(with hole)

Features:

Output port compression 12V.

Built in stabilivolt, Only add a resistance to IC VDD feet when under 24V power supply.

Gray level 256 can be adjusted and scan frequency not less than 400Hz/s.

Built in signal reshaping circuit,after wave resha-ping to the next driver, ensure wave-form distor-tion not accumulate.

Built-in electric reset circuit and power lost resetcircuit.

Cascading port transmission signal by single lin-e.

Any two point the distance more than 10m tran-smission signal without any increasecircuit.

When the refresh rate is 30fps, low speedmodelcascade number are not less than 512 points, hig-h speed mode not less than1024 points.

Send data at speeds of up to 400 Kbps and 800Kbps two patterns.

Images: