Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Hydroponic led grow light P600 600 watt actual power draw 350 watt 12 bands full spectrum led grow light
Parameter of platinum led P600:
Product Model | GL-P600 | Produce Size | 910*210*70mm |
Produce Weight | 8060g | Housing material | Iron |
Working current | 1620mA | Shipping Weight | 12kg/pc |
Power | 600W | Actual power |
350W |
LED quantity | 200PCS | Lumen | 9308.8 lm |
Inner packing size | 975*275*140mm | Outer packing size(2PCS) | 990*565*320mm |
The P600 effectively replaces a conventional 800w HPS grow light while only consuming 350 watts of actual power, giving your plants 100% Usable light that is perfectly tuned to create maximum photosynthetic response.
The P600 is one of our most popular lights due to its ability to reach perfectly to the depths of a 4-feet tent enabling maximum coverage. It’s also one of our most flexible lights that is perfectly scalable to any size grow area thanks to the long yet narrow panel dimensions. By using multiple panels, you’re able to perfectly cover any size grow area with maximum intensity. The most optimal solution possible for a 4x4 tent is 2x P600 units or in a 4x8 - 4x P600s. This results in maximum coverage, maximum intensity and maximum yield equal to more than 3k watts of HPS power yet still able to plug right in to a standard 15A home wall outlet and run cool. Highly recommended.
The P600 light is equipped with 200pcs 3w epistar led, 4pcs big quiet fans and 5pcs Aluminum heat sink, perfect cooling the light system and keep the light a long time output.
Secondly further focus by the 90 degree glass lens, expanding the lighting area and focus the light working on the palnt, make the light 100% absorbed
VEG and BLOOM dual switch control, adapt to different stage of plant requiry
Par value test report based on the below equipment.
PAR Value Test Report at our 4ft by 4ft grow tent
Test at 18 inch:1195umol.m2.s
Test at 24 inch:842umol.m2.s
P300 300w led grow light P450 450w led grow light
Shenzhen Gerylove Company is established in 2014, member of Shenzhen Hanhua OPTO CO.,Ltd which have been established for 11 years.
Our factory is equipped with advanced equipment, professional technicians and highly qualified management team, with the principle of "survive by quality, develop by technology, orient by the market and aim at service", providing high-quality productions and services. Our company mainly produces LED grow lights, COB led grow lights and LED aquarium lights, which are all researched by our own engineering department
Total employee: 165 staff
Total area:1,000-3,000 square meters
Producing line: 3 lines
Certification:CE/RPHS/FCC
3 special inspection line:Before we shipping the goods to our respected clients, all of the products will get through 3 special inspection line
Line one: first, our special inspection team will go though all the products, to check out wether there is stain or scratch on the shell
Line two: Second, all the products will lighting in our test room for 12hrs to make sure of the quality, every 2hrs, our workers will check the light to find out wether there is any untoward effect. if so, we will find out the problem and reproduce the light
Line three: After have pass the two special line, our workers will retest each piece of our led grow light, make sure all the data are under nomal range
Leading time:
if you worry about the leading time, we have a Emergency Response Team, which constitute with 1-3 years work experience staff, they are more fast than the other workers.
P600 Package info:
1pc600w led grow light
1pc hang wire
1pc power cord( US standard, EU standard, Itally standard, UK Standard, AS standard ect..... available)
Ineer Packing size: 995*295*145mm
Out packing size:1010*310*330mm( 2pcs per carton)
When find the quality isues, plz state the problem with pictures, if possible plz combline with vedio, when we confirm it is our quality issue, we will resend you the demage part or the whole light to you.
We will teach you how to replace the demage part. and you also can be a good engineer:)
Q: In a 4x4 recommended 2xP300 or 1xP600 ?
A:optimum wattage is 40-50 watts per square foot. You have 16 sq. ft. so, 640-800 watts total. 2-P300's will not be enough. Try 2-P450's you'll be blown away with results.
Q: can this be plugged into a 12v outlet
A:No. It operates on 85V-265V
Q:can these lights be daisy chained and if so how many can be plugged together
A:Yes, and the second question has more to do with the fuse box and how much power is supplied. A guess would be 8-10
Q:How do these really comapre to a 600w hps setup? I have a 4x4 grow and currently on run 1 600w hps, what would the befit be from running one of yours
A:It delivers the light of a 600watt HPS for considerably less electricity, virtually eliminates your heat issue and has a 50,000 hour life. That equates to 7+ years of service (18- hour cycle) or 11+ years (12- hour cycle) without replacing any bulbs. If your grow is set with 220-volt service, your energy savings are greater than 220v, and this unit self-senses your voltage. This unit is very-well engineered, by appearances
Q:can it be used outdoors?
A: Out in a greenhouse, probably. In the weather, no. It isn't sealed for water.
Q:how much noise do the fans make? louder than a desk fan? could I sleep in the same room?
A: Very quiet. More like 2 computer fans. you can't hear it with the tent zipped up. They're super quiet
Customer Reviews total 0 items