Brand：	none
Address：	China
Min.Order：	none
Supply：	none
Valid until：	Long Term

Product Details

DALI Signal&Push Dim Control RGB PWM LED DALI Dimmer Controller

Product Description

Features of PWM LED DALI Dimmer Controller:

1,PWM Output Current:4A/CH. MAX 12A Output.

2,DALI Digital Control Input, Dimming Control LED Module.

3,Addressing Output Channel.

4,Dimming Range Is From 0-100% Range, (LED Brightness Start In 1%).

5,Used for DC Power Supply . Over-temperature Protection, Security Level Is 2.

6,Support Touch Dim Function and Can Be Dimmed Manually.(220VAC Dimming Way)

7,Three Channels DC12V-24V Constant Voltage Output.

Tech-parameter of PWM LED DALI Dimmer Controller:

Control channels:3CH	Input: DC12V-24V	Output:4A/CH Max12A
MAX Power:144W(12V)/288W(24V)	Frequency: 500Hz	Touch Dim AC Input:220V
Signal Input:DALI Signal&Touch Dim	Connection:Screwless Terminal	Dimming Control DALI Definition:IEC62386
Product size: L160W47H22(mm)	Gross Weight:220g	Work Temp.: -30~70℃

Model NO.	Channels	Input Voltage	Max Current Load	Max Output Power	PWM Socket
DL8001	1 CH	DC12V~24V	1CH*10A	120W(12V)/240W(24V)	Screwless Terminal
DL8002	2 CH	DC12V~24V	2CH*6A	144(12V)/288W(24V)	Screwless Terminal
DL8003	3 CH	DC12V~24V	3CH*4A	144W(12V)/288W(24V)	Screwless Terminal
DL8009	1CH	DC12V~48V	1.2A	56W	Screwless Terminal
DL8006	2CH	DC12V~48V	350mA&700mA	32W/64W	Screwless Terminal
DL8008	3CH	DC12V~48V	350mA&700mA	48W/96W	Screwless Terminal

Touch Dim Functional Description of PWM LED DALI Dimmer Controller:

1,Short press the Touch DIM switch(<0.5s)to control the lamp on or off.

2,Long press the Touch DIM switch(>0.5s)to dim the brightness of light;The dimming direction will change every time after pressing switch.

3,When the light being turned off,long press the Touch DIM switch can turn on the light and adjust the brightness according to the dimming direction.

4,The brightness adjustment range is 1%-100%,and the light can be turned off through short pressing when do the adjustment with long pressing Touch DIM switch.

5,Power off memory function,the power-down state before will be maintained when power on again.

Product Installation Notes:

1,Please read the connecting instruction picture before installation.

2,Please use the complete set of product according to the provided specification.

3,Please firstly pressure the cap end down in wire connecting process,then insert the thread of wire,and lastly check the wire is or not insert firmly.

4,In order to avoid the damage of the equipment,please check the connecting method is correct or not before connecting the power.

5,The DALI bus is using BV 2 x1. 5 mm wire, the longest distance is 300 meters.

Remark:DALI and Touch DIM Functions can’t be used simultaneously,which can be controlled respectively by using DALI controllers or equipments with Touch DIM Function.

Touch Dim Wiring Diagram: