Share
Brand： |
none |
Address： |
China |
Min.Order： |
none |
Supply： |
none |
Valid until： |
Long Term |
Product Details
Flicker Free 8 x RGBW Dimmable DMX Driver for RGBW LED Strip
Dimmable DMX Driver
Details of 8 x RGBW Dimmable DMX Driver:
1,Converts standard DMX512 signals to PWM output for driving 12V or 24VDC LED lighting.
2,High 32x4A power rating supports large installations up to 1536W(12V)/3072W(24V).
3,5000Hz/500Hz PWM frequency to avoid flicker when filming in Cameras or not .
4,32 channels output can drive up to eight independent sections of conventional five-wire Red-Green-Blue-White LED lighting or 32 sections of single-color LED lighting.
5,Can achieve asynchronous color changes effect under working with dmx master controller,dmx console or dmx swtich control.
6,Switchable Resolution:8-Bit for Standard DMX or 16-Bit for Precise Color Mixing and Dimming.
7,Built-in Switchable DMX Termination.
8,With DIP Switch for Easy Access and Setting the DMX Address without Power.
9,RJ45 and 3/5-PIN XLR and Terminal Block Connections for DMX Signal In and Out.Terminal Block DMX output includes a DMX signal amplifier for clean transmission through long cables.
10,A Green Light Indicator Show if the DMX Signal Runs . A Red Light Indicator Show if the
Power In.Power without Flashing,Smooth at Low.
11,Strong Anti - Interference Ability ,Humanized Terminal Design.
12,Customized/3 Year Warranty .
Specification of 8 x RGBW Dimmable DMX Driver:
Control channels: 32CH | Input:: DC12-24V | Output: 4A/CH, MAX 128A |
MAX Power:3072W(24V)/1536W(12V) | Frequency: 500Hz(L)/5000HZ(H) | Signal Isolation: > 1000V |
Signal Input: DMX512/1990 | The light gray level: 8bit/16bit | Protection Class: IP40 |
Gross Weight:: 1000g | Product size: L290*W122*H33(mm) | WorkTemp.: 0~70℃ |
| New DMX Decoder Controllers Series 8Bit / 16Bit | ||||||
| Model NO. | Channels | Input Voltage | Max Current | Max Output Power | DMX512 Socket | Bits |
| DE8504 | 4CH | 12V~24V | 4CH*10A | 480W(12V)/960W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
| DE8506 | 6CH | 12V~24V | 6CH*5A | 360W(12V)/720W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
| DE8508 | 8CH | 12V~24V | 8CH*10A | 960W(12V)/1920W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
| DE8512 | 12CH | 12V~24V | 12CH*7A | 1008W(12V)/2016W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
| DE8516 | 16CH | 12V~24V | 16CH*7A | 1344W(12V)/2688W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
| DE8524 | 24CH | 12V~24V | 24CH*5A | 1440W(12V)/2880W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
| DE8532 | 32CH | 12V~24V | 32CH*4A | 1536W(12V)/3072W(24V) | XLR/RJ45 Screws | 8Bit / 16Bit |
Images of 8 x RGBW Dimmable DMX Driver:
Instructions of 8 x RGBW Dimmable DMX Driver:
1, DMX Signal IN/OUT interface: RJ45 / 3 Pin screws / 5 Pin XLR connector.
Specially 3 Pin screws interface with signal amplifier function.
2, DMX address encode with Dip-Switch(NO.1 to NO.9),
comply to universal DMX512 dial code.
3, Dip-Switch NO.10 is TERM for whole signal circle.
4, Dip-Switch NO.11 for Frequency option
ON: 5000HZ(H) OFF: 500Hz(L
5, Dip-Switch NO.12 for Bit option:
ON: 16bit OFF: 8bit
NO.11 and NO.12 change, come into operation when Re-Power on.
6,POWER IN DC12-24V, Common anode constant voltage
output, can meet all kinds of full color module and monochrome module and automatically according to the lamps module load adjust output current, each channel maximum current not more than 4 amps. SELF-TESTING:Put all Dip-Switch NO.1 to NO.9 ON, full channels output 3 seconds, then each color gradient.
Wiring Diagram:
DMX-512 control signal connection :
1, DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512
controller output signal positive, signal negative, signal ground with DE8532 input
interface corresponding connection.
2, DMX5000 output and DE8532's transmission lines can't be over 300 meters.
3, DMX5000 each interface can with not more than 170 pieces of DE8532. eight output interface.
Through the JBLED FLASH light making software and can with computer on line control. Realize
infinite contact the DMX lights.
4,When connected 32 pieces of DE8532, DMX signal must add a signal amplifier RE2000 .RE2000 Cascade can't more than 4 PCS.
Customer Reviews total 0 items