NEW rgb led controller Constant Voltage PWM Signal dmx decoder chip

dmx decoder chip

SUMMARIZE:

Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~24 Channels for option and each channel able to achieve 8bits/16bits levels of brightness controlling,and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.

Features of 5A*24CH DMX512 Decoder DE8524:

1,Meets DMX512/1990 Signal,with RJ45 and XLR-5 interface to choose.

2,8bits or16bits for option,high(5000Hz) or low frequence(500Hz) for option, signal isolation,DMX signal amplifier, full-color with driver control.

3,Power without flashing, smooth at low.

4,Output 24 channels,single channel maximum 5A output drive,total output is no more than 120A.

5,Can achieve asynchronous color changes effect under working with controller.

6,With the light color selected mechanism, and be able to control the light with 1~4 colors.

7,Setting DMX address freely by Dip Switch.

8,Strong anti-interference ability, humanized terminal design.

9,Custom-made available and 3 years warranty.

Tech-parameter of 5A*24CH DMX512 Decoder DE8524:

Input: DC12-24V                             Control Channels: 24CH          Output Current:5A/CH,Max120A

Max Power: 1440W/2880W            Frequnce: 500Hz/5000Hz        Resolution Rate:8bits/16bits   Working Temperature: -30-70℃     Signal Isolation:>1000V           Protection Grade: IP40

Input Signal:DMX512/1990 Standard Signal                   Signal Out: Constant Voltage PWM Signal

Gross Weight: 920g                        Product Size:L290*W122*H33mm

Specifications of DMX512 Decoder/Driver Series: 

Product Instructions of 5A*24CH DMX512 Decoder DE8524:

1, DMX Signal IN/OUT interface: RJ45/3 Pin screws/5 Pin XLR connector. Specially 3 Pin screws interface with signal amplifier function.

2, DMX address encode with Dip-Switch(NO.1 to NO.9),comply to universal DMX512 dial code.

3, Dip-Switch NO.10 is termination for whole signal circle.

4, Dip-Switch NO.11 for Frequency option: ON 5000HZ(H), OFF 500Hz(L).

5, Dip-Switch NO.12 for Bit option: ON 16bit ,OFF  8bit.

NOTE: NO.11 and NO.12 change, come into operation when Re-Power on.

6, POWER IN DC12-24V, common anode constant voltage output, can meet all kinds of full color module andmonochrome module and automatically according to the lamps module load adjust output current, each channelmaximum current not more than 5 amps.

7, SELF-TESTING: put all Dip-Switch NO.1 to NO.9 on, full channels output 3 seconds, then each color gradient.

Wiring Diagram:

DMX512 control signal connection

1, DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller input and output signal positive,signal nagative,signal ground with DE8524 input interface corresponding connection.

2, The DMX5000 output and DE8524's transmission lines can't be over 300 meters.

3, The DMX5000 each interface can connect with no more than 170 pieces of DE8524. Eight output interface. Through the JBLED FLASH light making software,it can realize infinite connectting the DMX lights with computer on-line controlling.

4, When contacting 32 pieces of DE8524, DMX signal must add a signal amplifier such as RE2000,cascade can't more than 4 PCS.

5, At the end of the connection, we should connect a DMX signal termination when putting on the the NO.10 dip switch of DE8524.